The Frontier Sixshooter Community Message Board

CSA - Tom Richardson, 2017-03-07, 18:41
- We will see you there... - Rob Leahy, 2017-03-08, 12:16
  - Good! I was hoping you were planning on making it - stonewalrus, 2017-03-08, 14:47
  - Glad your boss let you have a vacation! - John K., 2017-03-08, 19:11
    - I work for the same kinda AH you do... I hope you can - Rob Leahy, 2017-03-08, 19:41
      - Made reservations today! - John K., 2017-03-08, 20:02
        
        It will be good to see you again John. - Hoot, 2017-03-09, 06:02
        
        Same here, Hoot. - John K., 2017-03-09, 12:57
        
        Great, no reason to let that tab at the truck stop keep you - Rob Leahy, 2017-03-09, 10:53
        
        LOL, no worries. Had that *really* happen once. - John K., 2017-03-09, 12:51
        
        Woah...that wasn't cool. NT - Bryan, 2017-03-09, 12:56
- I will be there with a guest - NT - Bryan, 2017-03-08, 15:02
  - Will the Porsche make it down in the holler? - Hoot, 2017-03-09, 06:03
    - One way trip? Yes! - Bryan, 2017-03-09, 12:54
      - Couple wraps of 3/8" chain around the middle and - John K., 2017-03-09, 13:01
        
        Yea man...you can do that once too! NT - Bryan, 2017-03-09, 13:59
      - made it both ways with my low Taurus SHO - bj, 2017-03-09, 19:34
        
        Exactly... - Bryan, 2017-03-09, 20:29
    - Mark Cassill gave me a hard time about the Porsche but... - Bryan, 2017-03-09, 20:31
- Looking forward to it. NT - mcassill, 2017-03-09, 20:08

IMR 4895 - Creeker, 2017-03-06, 08:25
- IMR 4895 - Cherokee, 2017-03-06, 11:00
  - IMR 4895 - Creeker, 2017-03-06, 18:09
    - 55 gallon drum = awesome. - Bryan, 2017-03-06, 21:20
- Saw that. - Hoot, 2017-03-09, 06:08
- IMR 4895 I'm thinkin the answer may b simpler than that . . - RidinLou, 2017-03-09, 11:18
- Appreciate the feedback - Creeker, 2017-03-09, 21:24

Anyone have a Triple K holster list? - Hoot, 2017-03-06, 08:06
- Anyone have a Triple K holster list? - Slow Hand, 2017-03-06, 08:20
  - BINGO! - Hoot, 2017-03-06, 09:05
- Follow-up question for extra credit. - Hoot, 2017-03-08, 07:24
  - Glock has a nice chart. But - Rob Leahy, 2017-03-08, 08:56
    - Thanks Rob. Very helpful. - Hoot, 2017-03-08, 09:11
      - oh and mag pouches belong on the weak hand side for - Rob Leahy, 2017-03-08, 13:31
        
        Understood. - Hoot, 2017-03-09, 06:05
      - Thanks Rob. Very helpful. - Slow Hand, 2017-03-09, 06:03
        
        Indeed. - Hoot, 2017-03-09, 06:04
        
        Indeed. - Slow Hand, 2017-03-09, 10:57

Rob, I just ordered a Cattleman..... - Otony, 2017-03-05, 17:01
- Yes Sir! I prefer those and the Match Champion - Rob Leahy, 2017-03-06, 16:42

The new Miles Fortis blog - bob, 2017-03-05, 10:23
- Right you are, sir. - Otony, 2017-03-05, 17:13
  - Thank you. And I do try sir. - Miles, 2017-03-06, 13:29

Couldn't pass this one up... - Slow Hand, 2017-03-04, 18:05
- Someone sock drawer gun... - Rob Leahy, 2017-03-04, 18:44
- Nice catch. NT - Bryan, 2017-03-04, 19:55
- Great find! - Brian A, 2017-03-04, 20:20
- Couldn't pass this one up... - Catoosa, 2017-03-04, 21:54
- Buying that was a good choice... - Hobie, 2017-03-04, 21:56
- Couldn't pass this one up... - Cherokee, 2017-03-04, 22:10
- Yes, that was a heckuva deal - cubrock, 2017-03-05, 06:53
- Nice grab Doug! - Hoot, 2017-03-05, 07:22
- I'm beyond jealous... NT - anachronism, 2017-03-05, 09:28
- Couldn't pass this one up... - Fivegunner, 2017-03-05, 09:30
- Like that - Creeker, 2017-03-09, 21:25

Paul, What to do with Mac1 Secret Sauce? - rob, 2017-03-03, 14:51
- Paul, What to do with Mac1 Secret Sauce? - Paul, 2017-03-03, 15:45
  - They sent me a new felt wiper... - rob, 2017-03-03, 16:47
    - It's getting better with use... - rob, 2017-03-03, 19:47
      - One last update... - rob, 2017-03-04, 10:48

FS: Browning BPCR 40-65 package, interest - MDF99, 2017-03-03, 10:48
- I would definitely be interested but timing is off for me... - Bryan, 2017-03-03, 16:22

The trifecta: S&W Model(s) 65, 66, and 67 - Scribe, 2017-03-03, 07:53
- The trifecta: S&W Model(s) 65, 66, and 67 - Fivegunner, 2017-03-03, 08:32
- The trifecta: S&W Model(s) 65, 66, and 67 - Catoosa, 2017-03-03, 10:04
  - The trifecta: S&W Model(s) 65, 66, and 67 - Robb Barnes, 2017-03-03, 20:25
    - There have been two model 520's from S&W - Andrew, 2017-03-03, 21:22
      - There have been two model 520's from S&W - Robb BArnes, 2017-03-04, 09:57
      - I remember when S&W Did that... as confusing as " M&P" - Rob Leahy, 2017-03-04, 15:29
- The trifecta: S&W Model(s) 65, 66, and 67 - Big Six, 2017-03-05, 13:05
- Looking for 65 - SKgrips, 2017-03-13, 17:37

WIn/Miroku 94 30/30 posted elsewhere... - bmize, 2017-03-01, 14:19

Someone needs this classic Smith... - Hoot, 2017-03-01, 12:51
- Hoot you should buy this! - Fivegunner, 2017-03-01, 14:16
  - You are correct! - Hoot, 2017-03-02, 06:42
    - You are correct! - Catoosa, 2017-03-02, 10:26
- Hoot. don't you just love all your enabling friends? - Murphy, 2017-03-02, 12:18
  - You guys are awful! - Hoot, 2017-03-02, 12:23
- Boy am. - Robb Barnes, 2017-03-02, 15:04
  - Boy am. - Murphy, 2017-03-02, 18:34
- The first step is to admit to weakness. - Hoot, 2017-03-03, 06:29
  - The second step... - Paul, 2017-03-03, 06:47
    - I'll put your name on it Paul. - Hoot, 2017-03-03, 07:09
      - "Repent at leisure"... - Paul, 2017-03-03, 07:13
  - I'll bring plenty of Kleenex - Catoosa, 2017-03-03, 09:27
  - But I am constant as the northern star... - John K., 2017-03-03, 09:30

EPS holster for LCP - Frank S, 2017-03-01, 07:31
- Frank, do you want a cross draw slide or - Rob Leahy, 2017-03-01, 12:39
  - Frank, do you want a cross draw slide or - Frank S, 2017-03-01, 12:53

Bought an old Lodge #14 Dutch oven today..... - Otony, 2017-02-28, 21:28
- I love cast iron cookware. - Andrew, 2017-02-28, 22:30
  - Yes, smooth inside - Otony, 2017-02-28, 23:06
    - Feller at a flea market a couple weeks ago had a chrome - Andrew, 2017-02-28, 23:19
- Bought an old Lodge #14 Dutch oven today..... - uncowboy, 2017-03-01, 09:17
- darn good buy and the old ones are best. - cable, 2017-03-01, 11:23
- I've got a whole pantry of the stuff can't use anymore... - pokynojoe, 2017-03-02, 08:18

Social Security Gun Ban Repeal - Big Six, 2017-02-28, 19:57
- Social Security Gun Ban Repeal - Cherokee, 2017-03-01, 15:44

In by noon, out by 3. - Hoot, 2017-02-28, 08:00
- In by noon, out by 3. - Cherokee, 2017-02-28, 09:47
- Sounds very encouraging... - Brian A, 2017-02-28, 11:58
- I should send you the PP I have... - Hobie, 2017-02-28, 20:09
  - Deal! - Hoot, 2017-03-01, 08:06
  - Or, you could send them both to me... - Brian A, 2017-03-01, 09:51
- In by noon, out by 3. - Catoosa, 2017-03-02, 09:52

Different. - Hoot, 2017-02-28, 07:52
- Different. - Cherokee, 2017-02-28, 09:45
  - Very interesting... - Brian A, 2017-02-28, 12:03
    - My thought as well Brian. - Hoot, 2017-03-01, 08:04
      - From the pictures it looks like... - mcassill, 2017-03-02, 04:56
        
        That's what I see too Mark. - Hoot, 2017-03-02, 06:41
        
        That's what I see too Mark. - Brian A, 2017-03-02, 06:53
        
        1917 cylinders were a bit short. - mcassill, 2017-03-02, 09:56
        
        Yep. Forgot that bit. - Hoot, 2017-03-02, 12:25

Donation to the forum - charge contested - Paul, 2017-02-28, 06:46

Gunsite Jeff Cooper DVD sale... - Bryan, 2017-02-27, 19:30

The Hammer - non-firearm post - Paul, 2017-02-27, 17:12
- The Hammer - non-firearm post - Cherokee, 2017-02-27, 20:29
  - I'm not sure - Paul, 2017-02-28, 06:52
- I get a Norton security alert from your site - cubrock, 2017-02-28, 08:28
  - I get a Norton security alert from your site - Paul, 2017-02-28, 08:38
    - Thanks! (nm) - cubrock, 2017-02-28, 09:17
    - I reported it to Norton - cubrock, 2017-02-28, 09:29
      - Thanks! nt - Paul, 2017-02-28, 09:31
        
        It worked! Norton has changed your rating. - cubrock, 2017-02-28, 18:38
        
        Thank you! - Paul, 2017-02-28, 19:49
  - From Norton's site - Paul, 2017-02-28, 08:41
- Wonderful story! - cubrock, 2017-02-28, 09:20

Where to buy a seal kit for Benjamin 397PA? - rob, 2017-02-25, 17:45
- Try This Place... - ~JM~, 2017-02-25, 18:28
- JM's right, except... - Paul, 2017-02-25, 20:24
  - JM's right, except... - uncowboy, 2017-02-26, 07:22
  - That's the place I had saved earlier.... - rob, 2017-02-26, 08:11
    - That's the place I had saved earlier.... - Paul, 2017-02-26, 20:40
      - Interesting... - rob, 2017-02-26, 22:58
        
        I hope you included... - Paul, 2017-02-27, 07:05
        
        Some of it comes with the kit... - rob, 2017-02-28, 05:29
        
        A little goes a long way... - Paul, 2017-02-28, 08:10

Austin Behlert ... Gunner - Rob Leahy, 2017-02-25, 15:27
- Austin Behlert . - Fivegunner, 2017-02-26, 07:05
  - Austin Behlert . - uncowboy, 2017-02-26, 07:19
    - Thanks for the history! nt - Rob Leahy, 2017-02-26, 08:16

Cast bullets in 30-06 - Bryan, 2017-02-25, 10:33
- Cast bullets in 30-06 - RidinLou, 2017-02-25, 11:54
- Do you have the RCBS Cast Bullet Manual? - Rob Leahy, 2017-02-25, 11:59
  - Do you have the RCBS Cast Bullet Manual? - Cherokee, 2017-02-25, 13:00
  - I have the old Lyman cast manual but need to get the new one - Bryan, 2017-02-25, 17:44
- Cast bullets in 30-06 - JD, 2017-02-25, 14:52
  - Have you used this mold John... - Bryan, 2017-02-25, 16:07
    - I have used the 313299.... - JD, 2017-02-25, 18:18
      - Thanks for the info - NT - Bryan, 2017-02-25, 18:23
- The best reference out there.... - Glen, 2017-02-26, 20:19
  - Thanks Glen. I was hoping you would respond. NT - Bryan, 2017-02-26, 21:36
    - That NRA book - MDF999, 2017-02-27, 13:52
      - Wow, that's a resource I've never heard about. Thx! NT - Bryan, 2017-02-27, 14:01
      - See the chapters.... - Glen, 2017-02-28, 09:24
- Cast bullets in 30-06 - RidinLou, 2017-02-28, 21:41

Some of you know Sixgun on the Leverguns Community Forum. - Paul, 2017-02-24, 15:08
- Rats! - Wildcat, 2017-02-24, 17:59
- Sixgun had 10-12 Yorkies, IIRC. - John K., 2017-02-24, 20:44
  - A good guy. I rember the dogs and the fixed supressor - Rob Leahy, 2017-02-24, 21:36
- Too late for me... - Bryan, 2017-02-24, 22:50
- He has some of everything, somewhere. This is just the - Hobie, 2017-02-25, 06:00

What's .357 Max brass selling for? - cas, 2017-02-24, 10:26
- What's .357 Max brass selling for? - RidinLou, 2017-02-24, 11:03
  - it came to me as I was browsing here. - cas, 2017-02-24, 11:15
- What's .357 Max brass selling for? - Paul, 2017-02-24, 14:18

Oops... - Byron, 2017-02-23, 13:21
- Oops... - uncowboy, 2017-02-23, 14:46
- Oops... - Cherokee, 2017-02-23, 15:13
  - Just makes you wonder... - Byron, 2017-02-23, 15:59
    - it's a photo chop... - Rob Leahy, 2017-02-24, 14:53

for sale local forum: USFA 12 shot 22 [ not mine] - cable, 2017-02-23, 12:39
- Those are cool. Never seen one in person. NT - Bryan, 2017-02-23, 13:26
- I'm so glad I got a couple of USFA's when I did - Slow Hand, 2017-02-25, 20:29
  - me too ! - cable, 2017-02-25, 21:58
  - I miss that company...their products were like a wish list.. - Bryan, 2017-02-26, 13:12
    - i wonder too; some one said they may be at CSMC [ ? ] who - cable, 2017-02-26, 13:31

Any Redfield reference documents out there? - Hoot, 2017-02-21, 14:18
- Hoot, I have Nick Stroebel's book, but won't be able to - John K., 2017-02-21, 16:06
- Since my Stroebel is handy,...... - Jimmy P., 2017-02-21, 18:03
- Embarassed! - Hoot, 2017-02-21, 20:10
  - Page 100. - Drago, 2017-02-22, 00:10
  - There ya go! Jimmy P. Is right handy to have around. - John K., 2017-02-22, 07:29
    - Yep. I think we'll keep him on another week. - Hoot, 2017-02-22, 09:59
      - Aw shucks. Twernt nuthin'. nt - Jimmy P., 2017-02-22, 11:17

Shot the Model 10 snub nose - Scribe, 2017-02-21, 07:52
- Sounds like a darn good day.... nm - Brian A, 2017-02-21, 20:37
- Shot the Model 10 snub nose - Paul, 2017-02-22, 12:04
- Shot the Model 10 snub nose - John Meeker, 2017-02-22, 18:33
  - Big fan of steel and wood - Scribe, 2017-02-23, 06:50
    - There are other choices?!!? - Hoot, 2017-02-23, 07:12

Looking Glock Frame work referal - Gary G, 2017-02-20, 11:45
- Looking Glock Frame work referal - WIL TERRY, 2017-02-20, 19:04
  - Looking Glock Frame work referal - Gary G, 2017-02-20, 19:36
- I asked a local shop and was surprised to hear 4-5 weeks. NT - Bryan, 2017-02-20, 22:20
- What kind of work? - cubrock, 2017-02-21, 06:33
  - Are you in the Raleigh area? - Bryan, 2017-02-21, 07:10
    - Used to be - cubrock, 2017-02-21, 08:26
- Depends on the type of work you want done... - matt/pa, 2017-02-21, 09:18
- Looking Glock Frame work referal - Gary G, 2017-02-21, 10:12
  - Try this... - matt/pa, 2017-02-21, 10:14
    - Try this... - Gary G, 2017-02-21, 10:22
- SMC Tactical - cubrock, 2017-02-21, 12:33
  - SMC Tactical - Gary G, 2017-02-21, 13:43
- Looking Glock Frame work referal - DiamondD, 2017-02-22, 02:28
- Scratch SMC tactical - Gary G, 2017-02-24, 19:18
- Lew Gosnel; retired LA cop, Gunsite Instructor. I have seen - Rob Leahy, 2017-02-24, 21:56

Article on front Vs Gunsite; Because I know you all train, - Rob Leahy, 2017-02-20, 09:42
- Article on front Vs Gunsite; Because I know you all train, - uncowboy, 2017-02-20, 10:43
  - Wow, you worked for Austin Behlert! Tell us more. - Rob Leahy, 2017-02-25, 10:55
- That is one ugly girl - Sarge, 2017-02-25, 19:41
  - Hah! - Rob Leahy, 2017-02-26, 14:24
  - Lol! - rob, 2017-02-28, 14:40
- Tonight's training will be first aid and cpr.... - rob, 2017-02-28, 14:39