The Frontier Sixshooter Community Message Board

Colt Officer's Model .22 - Slow Hand, 2014-04-10, 20:07
- Colt Officer's Model .22 - Sarge, 2014-04-10, 21:45
- Assuming it is mechanically sound - cubrock, 2014-04-10, 22:04
- Colt Officer's Model .22 - D.Sikes, 2014-04-11, 11:05

USFA sheriffs model...i want to trade it on a longer - cable, 2014-04-09, 23:38
- Sell it to me... - Rob Leahy, 2014-04-10, 09:28
  - i might just do that, if i can find another USFA i want - cable, 2014-04-10, 09:54
    - i dont think he sheriffs models bring as much as the - cable, 2014-04-10, 10:04
      - For what it's worth... - Hoot, 2014-04-10, 11:03
        
        Thanks, i should have looked there ! - cable, 2014-04-10, 11:20
      - i dont think he sheriffs models bring as much as the - SIXGUNNER, 2014-04-10, 11:45
        
        Sixgunner is right, as always. The frames are different... - Boge Quinn, 2014-04-10, 12:44
        
        Oh come now... - cas, 2014-04-11, 10:45
        
        Yes, and a drill and a punch to get started properly ! - cable, 2014-04-11, 11:03
        
        Why go to all that trouble.......? - Drago, 2014-04-11, 11:51
        
        not in blue or case color > - cable, 2014-04-11, 12:19
        
        Yes, and a drill and a punch to get started properly ! - CJM, 2014-04-12, 15:49
        
        oh my..out of my league then ! - cable, 2014-04-12, 16:45
        
        That's wait JB Weld is for! - Slow Hand, 2014-04-12, 17:47
        
        this is why i am a physician, i dont have enough sense to - cable, 2014-04-10, 12:46
    - I'd say about $1500, TODAY. Tomorrow, maybe more... - Boge Quinn, 2014-04-10, 12:49
  - ColtForum - Jeff Taylor, 2014-04-11, 05:01
    - The one with the ivory is very well priced - cubrock, 2014-04-11, 07:20

Looking for a piece of old walnut... - TomM, 2014-04-09, 11:53
- Do you still need this piece of walnut? - Glen, 2014-04-11, 18:57
  - Do you still need this piece of walnut? - TomM, 2014-04-15, 14:07
    - Email me your address..... - Glen, 2014-04-15, 14:21

I can now legally carry a sword concealed! - stonewalrus, 2014-04-09, 08:13
- I can now legally carry a sword concealed! - Mark, 2014-04-09, 09:18
  - Think Beltsword! - Scribe, 2014-04-09, 11:45
    - I have always liked the looks of a Wakizashi too - stonewalrus, 2014-04-09, 13:56
- Back in the day - Bob Hatfield, 2014-04-09, 16:49
  - I think KY includes rifles and shotguns - stonewalrus, 2014-04-09, 18:40
  - Handguns only in VA. Knives are limited in length. - Hobie, 2014-04-09, 21:19
  - Ours is LTCH - Slow Hand, 2014-04-10, 04:32
- Congrats!! - Slow Hand, 2014-04-09, 18:21
  - I have heard you can't mail order them - stonewalrus, 2014-04-09, 20:17
    - I have heard you can't mail order them - Slow Hand, 2014-04-10, 04:27
    - i dont think so; certainly can order them directly yourself - cable, 2014-04-11, 09:55
- Gladius - Sarge, 2014-04-10, 00:17
  - Gladius... - Rob Leahy, 2014-04-10, 09:29

Reloading .32 SWL Wadcutters - Hoot, 2014-04-08, 15:13
- Reloading .32 SWL Wadcutters - John K., 2014-04-08, 15:58
  - Reloading .32 SWL Wadcutters - John K., 2014-04-08, 16:15
  - Flush seating is the ONLY option. - Hoot, 2014-04-08, 22:54
- Reloading .32 SWL Wadcutters is a PITA without the tooling.. - Who....me...??, 2014-04-08, 16:17
  - Thank you Sir. - Hoot, 2014-04-08, 22:57
- Size the bullets .312" - Glen, 2014-04-08, 18:23
  - Size the bullets .312" - Cherokee, 2014-04-08, 18:54
  - Glen, Sir, I was hoping you would weigh in. - Hoot, 2014-04-08, 22:51
    - Happy to help out. (nm) - Glen, 2014-04-09, 00:51
- Carbide dies over size cases - anachronism, 2014-04-09, 09:28

Finally determined my Colt 1911 front sight is indeed... - rob, 2014-04-07, 22:54
- In my experience.... - Glen, 2014-04-07, 23:14
  - I have a vice but no brass plates or other suitable... - rob, 2014-04-07, 23:31
    - I have several vices - - John K., 2014-04-08, 00:05
      - I have several vices - - rob, 2014-04-08, 00:14
  - Cutting dovetails in a Colt Military slide - RidinLou, 2014-04-08, 20:56
    - Go to the Brownell's website.... - Glen, 2014-04-09, 00:53
- Like Glen said, Dovetail the front sight - Miles Fortis, 2014-04-08, 09:52
  - I had my commander dove tailed at Advanced Gun Works - MR, 2014-04-08, 10:45
- Rob, did I stupid out (again)? - Hoot, 2014-04-08, 23:02
  - Only if it was one of the first two or three CSA's ... - rob, 2014-04-09, 00:16
    - OK, good. I am trying harder to remember names and faces. - Hoot, 2014-04-09, 05:59

Uberti Schofield - sjcollins, 2014-04-07, 22:45
- They seem to bring pretty tall money. - Andrew, 2014-04-07, 22:57
- I have one , works great. What is a good price. They have - cable, 2014-04-07, 23:22
- I passed on one last fall for $750. - AkRay, 2014-04-08, 01:15
  - got mine at Great Northern for $ 625.00 couple years back - cable, 2014-04-08, 09:21
- Jeff Quinn really likes em. - Rob Leahy, 2014-04-08, 09:19
- I have three of 'em, and would gladly pick up a fourth... - Boge Quinn, 2014-04-08, 10:17
- Uberti Schofield - sjcollins, 2014-04-08, 11:54
  - Although not 'period correct'... - Hoot, 2014-04-08, 13:47

Well, you don't see these everyday! - Glen, 2014-04-07, 20:44
- Well, you don't see these everyday! - Cherokee, 2014-04-07, 20:59
  - I thought 1910's had a thumb safety, but no grip safety? - Andrew, 2014-04-07, 21:02
- Well, you don't see these everyday! - Catoosa, 2014-04-08, 10:07
  - The "Lieutenant scratch"... - Rob Leahy, 2014-04-09, 08:54

My new Smith - Slow Hand, 2014-04-07, 20:09
- My new Smith - Cherokee, 2014-04-07, 20:57
- My new Smith - sjcollins, 2014-04-07, 22:43
- Speakin' of grips... - Catoosa, 2014-04-08, 09:57
  - Speakin' of grips... - Slow Hand, 2014-04-08, 11:27
    - Speakin' of grips... - Catoosa, 2014-04-09, 21:23
- That'll do. - Hoot, 2014-04-08, 15:14

ALL WHO WANT THE MUGS PLEASE READ!! - Andrew, 2014-04-07, 18:57
- e-mail sent.. - Rob Leahy, 2014-04-07, 19:12
  - I generally only use PayPal for my Ebay wanderings. - Andrew, 2014-04-07, 19:25
- ALL WHO WANT THE MUGS PLEASE READ!! - Drago, 2014-04-07, 20:30
  - ALL WHO WANT THE MUGS PLEASE READ!! - Lee J., 2014-04-08, 13:33
    - Nooooo!!!!!! There are plenty to go around Lee! - Andrew, 2014-04-08, 17:30
- ALL WHO WANT THE MUGS PLEASE READ!! - Jhenry, 2014-04-10, 16:45

Thinking of converting my SBH - Dave B, 2014-04-07, 12:54
- Trigger, rear grip frame mounting screws.. - Hoot, 2014-04-07, 13:05
  - Trigger, rear grip frame mounting screws.. - Dave B, 2014-04-07, 13:19
    - I know they are different. - Hoot, 2014-04-07, 13:42
- Thinking of converting my SBH - Josh M., 2014-04-07, 18:22
  - Thinking of converting my SBH - Josh M., 2014-04-07, 18:24
    - Josh, there is a edit feature... - Rob Leahy, 2014-04-07, 19:08
      - Yeah, but it's more fun to leave as-is! - Slow Hand, 2014-04-07, 20:01
  - Thinking of converting my SBH - Dave B, 2014-04-07, 20:09
    - Thinking of converting my SBH - Dennis, 2014-04-07, 20:42
      - Oh my - Dave B, 2014-04-08, 00:46

Spring cleaning time, items FS...... - Gunner, 2014-04-06, 21:34
- Check yer email....NM - Andrew, 2014-04-06, 22:32
  - Gunner....would like the - Bud, 2014-04-07, 06:48
    - You got it............ - Gunner, 2014-04-07, 19:31
      - Sent email - Bud, 2014-04-09, 11:18
        
        Sent email - Bud, 2014-04-09, 11:18
        
        Email sent to you. - Gunner, 2014-04-09, 22:34

Dream guns: we all have em...for me one of them has been - Rob Leahy, 2014-04-06, 20:43
- Dream guns: we all have em...for me one of them has been - Fowler, 2014-04-06, 21:28
- Dream guns: we all have em...for me one of them has been - sjcollins, 2014-04-06, 23:12
- Dream guns: we all have em...for me one of them has been - Jared, 2014-04-06, 23:27
- The stuff that dreams are made of! - brionic, 2014-04-07, 10:12
- Happy for ya Rob - Dave B, 2014-04-07, 12:01
- I'd tote that one. - MR, 2014-04-07, 14:13
- That is the 357 S&W that makes the most... - rob, 2014-04-07, 22:42
  - These are some junk box stocks that look like Asian copies - Rob Leahy, 2014-04-08, 19:32
    - These are some junk box stocks that look like Asian copies - rob, 2014-04-08, 20:38
      - Try out Scott's Jordan Troopers...they work the best for me - Rob Leahy, 2014-04-09, 08:42
- Dream guns: further refernce to Skeeter's Dream Gun article - Rob Leahy, 2014-04-08, 19:33

for sale Ruger SP101 4" .357 mag 500.00 - Rob Leahy, 2014-04-06, 20:10
- I am so glad that they started putting a real adjustable - Jared, 2014-04-06, 20:50
- for sale Ruger SP101 4" .357 mag 500.00 - Dave B, 2014-04-07, 12:02

Just got home from hearing Allen West speak! - Otony, 2014-04-06, 18:24
- Just got home from hearing Allen West speak! - Lee J., 2014-04-06, 19:21
  - he is superb! honest and forthright ! - cable, 2014-04-06, 22:00
    - he is superb! honest and forthright ! - Otony, 2014-04-06, 22:08
      - Carson would be the best president since Reagan - cable, 2014-04-06, 22:14
        
        Very well said! - rob, 2014-04-07, 23:44
- He is a real American! - Rob Leahy, 2014-04-06, 20:10
  - He doesn't mince words either... - rob, 2014-04-07, 23:45

Supporting my club I worked the .22 LR benchrest - Hobie, 2014-04-06, 15:15
- Supporting my club I worked the .22 LR benchrest - Paul, 2014-04-06, 17:10
  - I fixed the original hammer, had to replace the cam lock - Hobie, 2014-04-06, 18:49

Been away for a while.. - sjcollins, 2014-04-06, 10:17
- Welcome back - cubrock, 2014-04-06, 11:27
- Been away for a while.. - Cherokee, 2014-04-06, 12:07
- GREAT TO SEE YOU BACK. - Rob Leahy, 2014-04-06, 12:35
- Welcome back and let us know about the - Hobie, 2014-04-06, 15:10
- Welcome back... - Paul, 2014-04-06, 17:14
- Welcome back! - Hoot, 2014-04-07, 13:06

What happened to Leverguns? - Gary G, 2014-04-06, 09:56
- I was just there seconds ago. - cas, 2014-04-06, 10:20
  - Went back and it updated fine, was - Gary G, 2014-04-06, 12:33

45 acp cylinder for Blackhawk - stonewalrus, 2014-04-06, 08:10
- 45 acp cylinder for Blackhawk - Lee J., 2014-04-06, 08:44
  - I already have a lead on one, just wonder if it would work - stonewalrus, 2014-04-06, 08:47
- Chances are better than 50/50 in my experience - cubrock, 2014-04-06, 08:51
  - I used the same cylinder in four differnt BHs...finally gave - Rob Leahy, 2014-04-06, 12:12
- What is a decent price to pay for a cylinder - stonewalrus, 2014-04-06, 22:01
  - Been a little while since I was in that game but.. - Hoot, 2014-04-07, 13:08

Ask and ye shall receive... - pokynojoe, 2014-04-06, 07:21
- Ask and ye shall receive... - Jared, 2014-04-06, 08:29
- It's gone to someone in "The Great Lake State" - pokynojoe, 2014-04-06, 08:32
  - And also to "The Lone Star State"... - pokynojoe, 2014-04-06, 16:55
    - And also to "The Lone Star State"... - Jared, 2014-04-06, 23:28
- Thank you - Fivegunner, 2014-04-11, 03:52
- Ask and ye shall receive... - Jared, 2014-04-12, 11:09

Teach y'all to ask what I've been doing... - Sarge, 2014-04-05, 21:28
- Looks like you have a winner. - Jared, 2014-04-05, 21:36
- Thank you for the article - stonewalrus, 2014-04-05, 21:54
- Levering - JLF, 2014-04-05, 22:07
  - LOL... - Sarge, 2014-04-05, 22:31
    - Jim Taylor's Puma will feed full wadcutters slow, everything - Rob Leahy, 2014-04-05, 22:37
    - Mine feeds jacketed and cast bullets just fine - stonewalrus, 2014-04-05, 22:52
    - LOL... - JLF, 2014-04-06, 01:19
      - Numrich 44 mag...I found one at Whittington Center last year - Rob Leahy, 2014-04-06, 12:33
- Three Five Seven carbine velocity..... - Byron, 2014-04-06, 10:22
  - Guilty as charged!! - Slow Hand, 2014-04-06, 12:44
    - That is great! - Sarge, 2014-04-06, 13:22
- just a fwiw (ymmv!) - bob, 2014-04-06, 11:43
- Great write up. I've got a Winchester Trapper 357 - BobM, 2014-04-06, 19:16
- Nice report Sarge. - Hoot, 2014-04-07, 13:11

6" M14 .38 - Slow Hand, 2014-04-05, 17:55
- Heck ya! - matt/pa, 2014-04-05, 18:13
- 6" M14 .38 - Cherokee, 2014-04-05, 18:53
- DA check. - JLF, 2014-04-05, 19:40
- Hard to beat a Model 14 - cubrock, 2014-04-05, 20:57
- I hope you grabbed it already. That is a skinny M10 price - Rob Leahy, 2014-04-05, 21:58
- Had an 8 3/8" K38 ages ago... - Sarge, 2014-04-05, 22:33
  - Still have my 8 3/8" K38 .. - Scribe, 2014-04-06, 06:54
- 6" M14 .38 - Catoosa, 2014-04-06, 22:30
- They are not called the Target Masterpiece for nothing... - Hoot, 2014-04-07, 13:13

Short story on hog hunting - ANoniMousse, 2014-04-05, 09:34
- the urban Pajama Boy hordes...HAR! Yep...see em in town - Rob Leahy, 2014-04-05, 10:23
- Well, I for one, am NOT offended. - Hoot, 2014-04-07, 13:21

Anybody know what happened to Sarge? Haven't seen him on - stonewalrus, 2014-04-05, 08:05
- Anybody know what happened to Sarge? Haven't seen him on - BobM, 2014-04-05, 09:05
- Anybody know what happened to Sarge? Haven't seen him on - Paul, 2014-04-05, 09:37
  - Good to know. Thank you. - stonewalrus, 2014-04-05, 09:58
- He's posted recently on Leverguns about his 357 Rossi NM - Edward Young, 2014-04-05, 13:40
- We're fine here and thank you for the concern.... - Sarge, 2014-04-05, 16:05

Bearcat for sale - Flatlander, 2014-04-04, 21:16

Sixgun for sale - Flatlander, 2014-04-04, 21:09
- My email is ... - Flatlander, 2014-04-04, 21:19
- Sixgun for sale - Art, 2014-04-06, 19:06

My Brother is Home from Afghanistan.... - TomC, 2014-04-04, 15:07
- My Brother is Home from Afghanistan.... - Cherokee, 2014-04-04, 15:20
- All right! - Hobie, 2014-04-04, 18:07
- Excellent! - Rob Leahy, 2014-04-04, 18:31
- There's no place like home... - Paul, 2014-04-04, 19:42
- My Brother is Home from Afghanistan.... - Art, 2014-04-04, 19:46
- That is excellent news - mcassill, 2014-04-04, 20:45
- Very good! - Hoot, 2014-04-07, 13:22

Moving back home - Miles Fortis, 2014-04-04, 13:21
- See you next year then, the Good Lord willing. nt - Paul, 2014-04-04, 15:06
- Moving back home - Cherokee, 2014-04-04, 15:20
- Safe travels. Look forward to saying hello! - brionic, 2014-04-04, 16:16
- Retirement to a defensible position is good... - Hobie, 2014-04-04, 18:07
- Moving back home - SIXGUNNER, 2014-04-04, 19:59
  - No too bad - Miles Fortis, 2014-04-04, 21:34
    - No too bad - SIXGUNNER, 2014-04-05, 09:33
      - Cast, Swaged, Jacketed etc - Miles Fortis, 2014-04-05, 10:04
- Where abouts in Missouri? - D. Sikes, 2014-04-04, 22:09
  - Sprangefiled - Miles Fortis, 2014-04-04, 23:03
    - That is about an hour or so from my in-laws - cubrock, 2014-04-05, 00:28
    - Sprangefiled...! We were just through there ;ast week... - Rob Leahy, 2014-04-05, 10:27
      - Sprangefiled...! We were just through there ;ast week... - sjcollins, 2014-04-06, 10:25
    - i sure miss AK ! and the work you guys did together ! - cable, 2014-04-05, 14:24
    - Sprangefiled - D.Sikes, 2014-04-06, 08:45
- Congratulations on the retirement! - Hoot, 2014-04-07, 13:36

Coffee Mug Proof - Andrew, 2014-04-04, 12:15
- Coffee Mug Proof - Cherokee, 2014-04-04, 12:26
  - Coffee Mug Proof - Lee J., 2014-04-04, 13:25
- In for 4 at that price - email sent (nm) - cubrock, 2014-04-04, 14:38
- Coffee Mug Proof - Aaron Everett, 2014-04-04, 16:39
  - Coffee Mug Proof - Woodswalker, 2014-04-04, 16:42
- WE ARE WELL PAST THE 36 UNIT MARK! - Andrew, 2014-04-04, 18:31
- Put me down for 2. Email inbound. - TomC, 2014-04-04, 21:24
- Coffee Mug Proof - Charles, 2014-04-05, 11:31

Hey guys, we oughta be in prayer for Mike F. over in OK... - Paul, 2014-04-04, 08:28
- Our thoughts are with his family. - brionic, 2014-04-04, 10:34
- Prayers on going for the Fletchers - Rob Leahy, 2014-04-04, 10:40
- Prayers Sent Up. - Drago, 2014-04-04, 12:53
- Hey guys, we oughta be in prayer for Mike F. over in OK... - Tom Richardson, 2014-04-04, 13:20
- Prayers on the way - Fivegunner, 2014-04-04, 15:30
- Hey guys, we oughta be in prayer for Mike F. over in OK... - Art, 2014-04-04, 19:38
- In my Deepest prayers... - D.Sikes, 2014-04-04, 22:12
- Prayers sent.... - Brian A, 2014-04-05, 09:00
- Done. - Hoot, 2014-04-07, 13:23