Carbide dies over size cases
Carbide dies over size cases. The original steel sizing dies were slightly tapered, wider at the base, and tighter at the mouth. The .32 Auto die suggestion sounds good, or you could try loading the cases unsized, if they'll chamber properly. Lees Factory Crimp Die is almost totally worthless to me, except for potential use as an oversized case sizing die with the guts removed.
Complete thread:
- Reloading .32 SWL Wadcutters -
Hoot,
2014-04-08, 15:13
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- Reloading .32 SWL Wadcutters -
John K.,
2014-04-08, 15:58
- Reloading .32 SWL Wadcutters - John K., 2014-04-08, 16:15
- Flush seating is the ONLY option. - Hoot, 2014-04-08, 22:54
- Reloading .32 SWL Wadcutters is a PITA without the tooling.. -
Who....me...??,
2014-04-08, 16:17
- Thank you Sir. - Hoot, 2014-04-08, 22:57
- Size the bullets .312" -
Glen,
2014-04-08, 18:23
- Size the bullets .312" - Cherokee, 2014-04-08, 18:54
- Glen, Sir, I was hoping you would weigh in. -
Hoot,
2014-04-08, 22:51
- Happy to help out. (nm) - Glen, 2014-04-09, 00:51
- Carbide dies over size cases - anachronism, 2014-04-09, 09:28
- Reloading .32 SWL Wadcutters -
John K.,
2014-04-08, 15:58