Sort of agree with Hobie.
My first choice would be an old steel Lyman if you can find one for a reasonable price. Second would be a new Lyman or Williams FP.
If you know your going to set it up for basically one load then the XS would be fine.
My two cents worth and probably over priced.
Complete thread:
- 94 Trapper in 30-30 nice little gun lousy sights... Need -
Rob Leahy,
2016-10-12, 19:11
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- My default choice would be the Williams FP, then a STEEL -
Hobie,
2016-10-12, 19:14
- I put a Williams receiver sight on mine too - stonewalrus, 2016-10-12, 21:04
- I put a Williams FP on mine and am happy with it - JD, 2016-10-13, 14:40
- Sort of agree with Hobie. - Jimmy P., 2016-10-12, 20:06
- Might try Skinner. - Wildcat, 2016-10-13, 09:27
- 94 Trapper in 30-30 nice little gun lousy sights... Need - Drago, 2016-10-13, 09:44
- Hey Rob, "lousy sights"? -
Drago,
2016-10-13, 11:56
- ;-) I am pretty sure the Duke had a brass bead, the Rifleman -
Rob Leahy,
2016-10-14, 08:28
- HEY ROB! McCAIN DID USE HIS SIGHTS... - Drago, 2016-10-14, 16:08
- ;-) I am pretty sure the Duke had a brass bead, the Rifleman -
Rob Leahy,
2016-10-14, 08:28
- 94 Trapper in 30-30 nice little gun lousy sights... Need -
Sarge,
2016-10-13, 20:32
- Thanks all! Good answers. I neglected to mention this wasn't -
Rob Leahy,
2016-10-14, 08:40
- Thanks all! Good answers. I neglected to mention this wasn't -
Jared,
2016-10-14, 09:33
- Remove the white line and blacken the sight for a good post. -
Hobie,
2016-10-14, 18:31
- Remove the white line and blacken the sight for a good post. -
Jared,
2016-10-14, 23:58
- Ok, so cutting the face of the sight might not be a cost -
Hobie,
2016-10-16, 21:53
- Ok, so cutting the face of the sight might not be a cost -
Jared,
2016-10-17, 08:26
- A trick courtesy of Tony Boggus. -
Hoot,
2016-10-17, 11:43
- A trick courtesy of Tony Boggus. -
Jared,
2016-10-17, 23:22
- A trick courtesy of Tony Boggus. -
Sarge,
2016-10-18, 16:04
- A trick courtesy of Tony Boggus. -
Jared,
2016-10-19, 08:18
- Gotcha... -
Sarge,
2016-10-19, 12:29
- Swiss Grobet #0 serrating file, 30 LPI works for me. -
John K.,
2016-10-19, 13:36
- Pic -
John K.,
2016-10-19, 14:31
- Thanks John - Sarge, 2016-10-19, 18:07
- Pic - Jared, 2016-10-19, 22:19
- Pic -
John K.,
2016-10-19, 14:31
- Swiss Grobet #0 serrating file, 30 LPI works for me. -
John K.,
2016-10-19, 13:36
- Gotcha... -
Sarge,
2016-10-19, 12:29
- A trick courtesy of Tony Boggus. -
Jared,
2016-10-19, 08:18
- A trick courtesy of Tony Boggus. -
Sarge,
2016-10-18, 16:04
- A trick courtesy of Tony Boggus. -
Jared,
2016-10-17, 23:22
- I've been making do with what I've got all my life, so it -
Hobie,
2016-10-18, 20:01
- I've been making do with what I've got all my life, so it - Jared, 2016-10-19, 08:20
- A trick courtesy of Tony Boggus. -
Hoot,
2016-10-17, 11:43
- Ok, so cutting the face of the sight might not be a cost -
Jared,
2016-10-17, 08:26
- Ok, so cutting the face of the sight might not be a cost -
Hobie,
2016-10-16, 21:53
- Remove the white line and blacken the sight for a good post. -
Jared,
2016-10-14, 23:58
- Remove the white line and blacken the sight for a good post. -
Hobie,
2016-10-14, 18:31
- Rob, I have a Skinner on my .45 Colt '94 AE. - Hoot, 2016-10-14, 09:50
- Thanks all! Good answers. I neglected to mention this wasn't -
Jared,
2016-10-14, 09:33
- Thanks all! Good answers. I neglected to mention this wasn't -
Rob Leahy,
2016-10-14, 08:40
- 94 Trapper in 30-30 nice little gun lousy sights... Need - Creeker, 2016-10-15, 09:32
- Check whether XS is still making their "cowboy" sights - B C, 2016-10-15, 16:05
- My default choice would be the Williams FP, then a STEEL -
Hobie,
2016-10-12, 19:14