WHOA! That seems to be a VERY short throat.
Could not tell you. Have just tried Gold Dot's and XTP's in new Starline brass. Brass is below trim length.
Complete thread:
- Bullets for Browning 53, 32-20 -
Scott Ambler,
2015-08-29, 10:41
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- WHOA! That seems to be a VERY short throat. -
Hobie,
2015-08-29, 11:32
- WHOA! That seems to be a VERY short throat. -
Scott Ambler,
2015-08-29, 11:54
- browning made a lot of the 53s, and the 45/70s - cable, 2015-08-29, 12:21
- WHOA! That seems to be a VERY short throat. -
Scott Ambler,
2015-08-29, 11:54
- Bullets for Browning 53, 32-20 -
Cherokee,
2015-08-29, 18:48
- Bullets for Browning 53, 32-20 -
Scott Ambler,
2015-08-29, 20:53
- it's easy and would be hard to mess it up -
cable,
2015-08-29, 21:26
- it's easy and would be hard to mess it up -
Scott Ambler,
2015-08-29, 22:33
- i would buy or rent a throating reamer and do it myself. i -
cable,
2015-08-29, 22:48
- Cable...... -
Scott Ambler,
2015-08-30, 09:20
- Scott, get in touch with Midwest Gunworks - brionic, 2015-08-30, 10:09
- Doc, I have seen Scott load magazines... He needs an -
Rob Leahy,
2015-08-30, 15:19
- oh............... well as you know i am almost that bad too - cable, 2015-08-30, 17:42
- 32-20 and Short throat - Todd C, 2015-09-13, 17:56
- Cable...... -
Scott Ambler,
2015-08-30, 09:20
- i would buy or rent a throating reamer and do it myself. i -
cable,
2015-08-29, 22:48
- it's easy and would be hard to mess it up -
Scott Ambler,
2015-08-29, 22:33
- it's easy and would be hard to mess it up -
cable,
2015-08-29, 21:26
- Bullets for Browning 53, 32-20 -
Scott Ambler,
2015-08-29, 20:53
- WHOA! That seems to be a VERY short throat. -
Hobie,
2015-08-29, 11:32