The Frontier Sixshooter Community Message Board

How about another AR question...free float vs. standard - rob, 2015-04-23, 12:53
- How about another AR question...free float vs. standard - uncowboy, 2015-04-23, 13:08
  - ^^^^^See Above^^^^^ - Miles, 2015-04-23, 13:21
- With the standard setup, sling or bipod... - mcassill, 2015-04-23, 13:26
  - I replaced a free float with the magpul and saved a - Cherokee, 2015-04-23, 13:32
    - For my son's Blackout I went with a simple... - mcassill, 2015-04-23, 13:58
      - That's exactly what I want. - rob, 2015-04-23, 14:00
      - The ones secured by screws to the barrel nut... - rob, 2015-04-23, 14:18
      - Is this the one... - rob, 2015-04-23, 15:52
        
        No, much more basic than that - mcassill, 2015-04-23, 16:03
        
        If you want to attach stuff... - mcassill, 2015-04-23, 16:09
        
        Like this... - mcassill, 2015-04-23, 16:13
        
        I'm not sure I like the Keymod stuff... - rob, 2015-04-23, 18:09
        
        Just how much force are you applying to your light? - mcassill, 2015-04-23, 18:23
        
        its not so much "how much force" as it is... - rob, 2015-04-23, 18:34
- How about another AR question...free float vs. standard - MDF99, 2015-04-24, 10:04
  - THAT is really cool! Nm - rob, 2015-04-24, 19:55
- If you are using a sling to shoot with - bj, 2015-04-24, 19:43

The Big Swede barks! - Hoot, 2015-04-23, 09:28
- How about the whole enchilada? - brionic, 2015-04-23, 12:44
- You're way ahead of me. - mcassill, 2015-04-23, 17:24
- The Big Swede barks! - Brian A, 2015-04-24, 06:53

Buybacks - Big Six, 2015-04-22, 11:05
- Bankrupting Buyback programs is fair game...I could see some - Rob Leahy, 2015-04-22, 11:22

It appears that Colt can't go broke competently either - mcassill, 2015-04-22, 07:13
- It's instructive how.... - rob, 2015-04-22, 08:23
  - Here Here - Creeker, 2015-04-23, 11:50

Never, never, ever... - Hoot, 2015-04-22, 06:43
- I'll buy the brass from you if that will help... - mcassill, 2015-04-22, 07:03
- Surely this isn't the first time you've done this... - Hobie, 2015-04-22, 07:07
  - Of course not! - Hoot, 2015-04-22, 07:57
- Sweet Dreams are made of these..... - John Meeker, 2015-04-22, 16:42
- If a fellow could find a reamer... - mcassill, 2015-04-22, 17:05
  - Interesting. - Hoot, 2015-04-23, 10:23
- What is even worse is if you buy a MOULD for..... - Harry O-1, 2015-04-25, 09:19

One more AR question: hammer pivot pin... - rob, 2015-04-21, 18:22
- in the middle of the hammer/trigger pin - Miles, 2015-04-21, 18:48
  - in the middle of the hammer/trigger pin - rob, 2015-04-21, 18:57
    - You gotz it - Miles, 2015-04-21, 19:03
      - It's pretty darned simple! - rob, 2015-04-21, 19:10
        
        You have a chassis - Miles, 2015-04-21, 19:22
        
        A Spanner combo tool with panash - Rob Leahy, 2015-04-21, 23:27
        
        What kind of madness is that? - Slow Hand, 2015-04-22, 04:07
        
        Well, I must admit that will be used much more than my - Rob Leahy, 2015-04-22, 10:45
        
        I kinda like it but being a gear head.... - rob, 2015-04-22, 11:08
        
        Your buddy needs to learn to transition to his pistol... - mcassill, 2015-04-22, 12:31
        
        i get that and all... - rob, 2015-04-22, 14:31
        
        The .25 Sharps is interesting - mcassill, 2015-04-22, 13:58
        
        Hmm....a .250-3000 in an AR platform? - Hoot, 2015-04-22, 14:47
        
        And a reinvention of the .25 TCU - mcassill, 2015-04-22, 16:26
        
        And a reinvention of the .25 TCU - bj, 2015-04-22, 21:36
        
        I'm sure we'll see the whole family of them resurrected - mcassill, 2015-04-23, 04:37
        
        Your post made me look it up. It IS interesting. - Hobie, 2015-04-22, 19:48
        
        Worst marketing choice ever. - cas, 2015-04-23, 05:53
        
        True enough... May I suggest .25 DED, i.e... - Hobie, 2015-04-23, 08:17
        
        We should try and work "tactical" in there somewhere. - Hoot, 2015-04-23, 09:55
        
        Ooo, Ooo! - Hoot, 2015-04-23, 10:05
        
        I'm thinking that a fellow... - mcassill, 2015-04-23, 11:26
        
        Whizzy...yes it is... - Rob Leahy, 2015-04-23, 14:59
        
        I'm having no luck selling my .22 Blackout idea. - cas, 2015-04-23, 15:32
        
        SNCO at Work Built One - Dave B, 2015-04-22, 23:09
        
        Sounds about like my experience.... - mcassill, 2015-04-23, 05:48

S&W M&P Pro - Creeker, 2015-04-21, 18:03
- S&W M&P Pro - Cherokee, 2015-04-21, 18:32
  - S&W M&P Pro - Creeker, 2015-04-21, 18:35
- Yesterday - Creeker, 2015-04-23, 08:51

Scam? - Drago, 2015-04-21, 11:55
- Scam? - Cherokee, 2015-04-21, 15:06
- Only if there's no product forthcoming... - Paul, 2015-04-21, 15:14
  - I've seen this before and... - rob, 2015-04-21, 18:29
    - I've seen this before and... - Paul, 2015-04-21, 18:58
      - Fun to tinker with and... - rob, 2015-04-21, 19:13
    - Yep, it'd be fun to play with all right. - Hoot, 2015-04-22, 06:47
      - Don't worry about that - mcassill, 2015-04-22, 07:11
- Why? - Byron, 2015-04-21, 18:34
  - Exactly. - Rob Leahy, 2015-04-22, 13:47
- Scam? - Probably not but I would wait. - Mark, 2015-04-25, 06:54

Odd forum behavior... - Hoot, 2015-04-20, 09:05
- Odd forum behavior... - Cherokee, 2015-04-20, 09:14
- Leftover anxiety of programmers... - Brian A, 2015-04-20, 09:17
- Odd forum behavior..text. - John Meeker, 2015-04-20, 10:31
  - Odd forum behavior..text. - Cherokee, 2015-04-20, 10:37
- Rest - Rob Leahy, 2015-04-20, 10:45
- Test - Paul, 2015-04-20, 15:01
  - So, what's your problem??? - Paul, 2015-04-20, 15:03
    - Spammers were using 'Test, this is just a test' in subject - Miles, 2015-04-20, 20:36
      - Aaaaahhh!!! Oops! - Paul, 2015-04-20, 21:03
        
        No problem - Miles, 2015-04-20, 23:27
      - Figured as much. Keep up the great work! - Rob Leahy, 2015-04-21, 09:41
    - A few days back, I was attempting to tell Dave B.... - Hoot, 2015-04-21, 05:14
- Ha! I feared this was about my inflammatory - BC, 2015-04-20, 21:16
  - This time.... - Hoot, 2015-04-21, 05:15
- Odd forum behavior... - Andrew, 2015-04-20, 22:24

Super Blackhawk Replacement - Dave B, 2015-04-17, 22:22
- Super Blackhawk Replacement - Cherokee, 2015-04-18, 07:10
- could not fix it??? - bj, 2015-04-18, 20:14
  - Threads were damaged. - Dave B, 2015-04-18, 20:44
    - RE- stocks... lowest bidding sub-contractor. - Hobie, 2015-04-18, 22:25
      - The stocks have been lacking lately. - Hoot, 2015-04-19, 10:12
    - Stocks and how they fit - Mark, 2015-04-19, 12:10
      - Mark hits the nail on the head as this corresponds to - Hobie, 2015-04-19, 13:27
      - Mine experience differs - Dave B, 2015-04-19, 14:26
        
        The FT .45s stocks (the ivory colored plastic) did NOT - Hobie, 2015-04-19, 17:52
    - I would still have a, gunsmith check it - Bj2, 2015-04-19, 16:29
  - Or "It's beyond our mechanical abilities.... - rob, 2015-04-21, 19:22
- I like that Ruger - Creeker, 2015-04-21, 18:22

So, the primary hog gun is currently a no-go. - Hoot, 2015-04-17, 21:46
- So, the primary hog gun is currently a no-go. - Cherokee, 2015-04-17, 22:00
- Love those Huskies... - Brian A, 2015-04-17, 23:22
  - Love those Huskies... - John Meeker, 2015-04-18, 08:22
  - Well Hoot, as Fermin once said: - MR, 2015-04-19, 12:12
- Apparently fixed. - Hoot, 2015-04-18, 13:16
  - Good deal!! - mcassill, 2015-04-18, 18:49
  - Good job! - Brian A, 2015-04-18, 22:44
  - Apparently fixed. - bob, 2015-04-18, 23:53
    - Very 98-ish but not exactly. - Hoot, 2015-04-19, 10:02
- Outstanding...... - TomC, 2015-04-18, 21:54
- Good hunting! - brionic, 2015-04-18, 23:59
- I had a similar problem years ago with my 300 Wby. - MR, 2015-04-19, 16:36
- So, the primary hog gun is currently a no-go. - Bob Hatfield, 2015-04-19, 20:14
  - Thank you Bob. - Hoot, 2015-04-19, 20:51
- So, what will you do? Do you need to barrow a rifle? - Rob Leahy, 2015-04-19, 21:29
  - You'd have to deliver it. - Hoot, 2015-04-20, 06:57
    - I'd love to be there... just let me know a month or two - Rob Leahy, 2015-04-20, 13:43
      - We would love to have you down Rob. - TomC, 2015-04-21, 20:12

AR scope ring advice solicited,,,, - John Meeker, 2015-04-17, 12:00
- AR scope ring advice solicited,,,, - Wildcat, 2015-04-17, 13:39
  - +1 to Burris PEPR mounts/rings - JD, 2015-04-17, 14:42
  - I have that on my son's rifle. Good piece of gear - mcassill, 2015-04-17, 16:24
  - Thank you....going off to tro;; the gun show this aft.... - John Meeker, 2015-04-18, 07:53
- AR scope ring advice solicited,,,, - Warhawk, 2015-04-19, 01:26

Range day... - Hobie, 2015-04-16, 18:54
- Range day... - Creeker, 2015-04-16, 19:51
- Range day - Bob Hatfield, 2015-04-16, 20:04
  - I had to get the .327 to make my Single-____ series - Hobie, 2015-04-16, 22:37
    - I had to get the .327 to make my Single-____ series - Remington40x, 2015-04-17, 10:31
      - I went back and forth on that for a while. - Hobie, 2015-04-18, 08:58

At the range - StoneWolf, 2015-04-14, 16:51
- At the range - uncowboy, 2015-04-14, 17:11
  - My Redhawk throats are perfect.... - rob, 2015-04-14, 18:05
- Definitly minute of critter hunt'n accuracy, Congratulations - ERSisk, 2015-04-14, 18:06
- Very Good. - Rob Leahy, 2015-04-14, 18:18
  - Good shooting. A Redhawk is definately on my bucket - TomC, 2015-04-14, 20:27
- There's just something about a Redhawk that says... - rob, 2015-04-14, 22:43
- Good shooting Matthew. - Hoot, 2015-04-15, 08:20
- Very good shooting... - Brian A, 2015-04-15, 16:08
- At the range - Catoosa, 2015-04-16, 09:59
- That's some serious metal there & nice shootin' - Creeker, 2015-04-16, 19:54

FS: Ruger LCP and 10mm Glock long slide parts again. - cas, 2015-04-13, 17:53

AR Lower receiver parts question... - rob, 2015-04-13, 14:27
- CMMG makes good parts kits and they give great support - Rob Leahy, 2015-04-13, 14:37
  - Mil-spec seems to be most common so... - rob, 2015-04-13, 16:31
- You small parts will do fine - Miles, 2015-04-13, 23:06
  - You small parts will do fine - rob, 2015-04-13, 23:12
- If I may... - Byron, 2015-04-14, 10:08
  - If I may... - rob, 2015-04-14, 11:37
- One area well worth spending some extra $$ on... - mcassill, 2015-04-14, 14:30
  - definitely on the list.... - rob, 2015-04-14, 14:43
    - A fellow can never have too many good rifles :-) - mcassill, 2015-04-14, 17:31
      - A fellow can never have too many good rifles :-) - rob, 2015-04-14, 17:38
      - Let's hope the bill passes - brionic, 2015-04-14, 17:52
        
        I have three lathes and a two mills in my garage - mcassill, 2015-04-14, 17:54
        
        I have three lathes and a two mills in my garage - Slow Hand, 2015-04-14, 20:21
        
        SBRs aren't even on the table here just yet - mcassill, 2015-04-14, 20:33
        
        SBRs aren't even on the table here just yet - Slow Hand, 2015-04-15, 05:23
        
        I already have :-) - mcassill, 2015-04-15, 06:34
      - A fellow can never have too many good rifles :-) - Hoot, 2015-04-15, 08:18

Some of last weeks production from SIMPLY RUGGED HOLSTERS - Rob Leahy, 2015-04-13, 11:54
- Looking good! I like my fancy SR holsters - brionic, 2015-04-13, 12:38
- Some of last weeks production from SIMPLY RUGGED HOLSTERS - Gary G, 2015-04-13, 22:47
- Very nice! - rob, 2015-04-13, 23:16
- VERY nice Rob! - Hoot, 2015-04-14, 06:56
- Sweet! - Brian A, 2015-04-14, 09:56
  - I thank you all. My core group of friends & customers. You - Rob Leahy, 2015-04-14, 11:05
- that Celtic Tooled Soutdough...simply gorgeous.. - Gila Jorge, 2015-04-15, 04:35
  - Thanks! I too am not enamored of the hammer strap...BUT - Rob Leahy, 2015-04-17, 10:08

Any board members ever played with 209 powered wax bullets? - ERSisk, 2015-04-12, 16:47
- Any board members ever played with 209 powered wax bullets? - uncowboy, 2015-04-12, 17:14
  - I've played with regular primed plastic reusable bullets - MR, 2015-04-12, 18:29
  - Dittos here. I have 50 converted .38 Special cases just - Hobie, 2015-04-12, 19:26
- The 209's are reserved for the .25ACP.... - Hoot, 2015-04-12, 19:43
- At one point..... - Glen, 2015-04-13, 08:48
  - At one point..... - rob, 2015-04-13, 23:21
  - Forgot about that! - Hoot, 2015-04-14, 07:11
  - I've done that. Lotsa fun! - Hobie, 2015-04-14, 14:39
  - At one point..... - Slow Hand, 2015-04-14, 20:27
    - Reamed 44spl cases - Bud, 2015-04-26, 12:36

Likely never to be seen in the Simply Rugged line up. - Hoot, 2015-04-12, 09:23
- I hope not. - MR, 2015-04-12, 10:19
- wonder what the holster on the other side looks like - you'd - stonewalrus, 2015-04-12, 13:19
- Where be the Raven? - Tom Richardson, 2015-04-12, 14:53
  - Where be the Raven? - mcassill, 2015-04-12, 16:13
  - Nevermore. - Boge Quinn, 2015-04-12, 19:31
    - Funny and true. The comedy grail. - brionic, 2015-04-13, 12:39
- I like it... - pokynojoe, 2015-04-12, 17:21
  - You should call it the Kitchen Sink Holster - StoneWolf, 2015-04-13, 20:49
- It would be great for... - rob, 2015-04-13, 23:24
  - I wonder if that's what it really is? - Hoot, 2015-04-15, 08:21
    - Some one say - - Catoosa, 2015-04-16, 10:04

Sniper in training... - stonewalrus, 2015-04-11, 19:00
- Sniper in training... - uncowboy, 2015-04-11, 19:15
- My son has the same rifle... - TomC, 2015-04-11, 19:18
  - i hated the sights - put a cheap Savage rear sight on it - stonewalrus, 2015-04-11, 20:18
- Sniper in training... - Cherokee, 2015-04-11, 19:39
  - I've noticed that children and some women seem to lack... - Hoot, 2015-04-12, 09:43
    - he definitely has trouble holding it up but is improving - stonewalrus, 2015-04-12, 11:59
      - he definitely has trouble holding it up but is improving - Catoosa, 2015-04-13, 12:55
      - A sling that he can wrap his arm in and pull the gun into - StoneWolf, 2015-04-13, 20:53

Marlin closing its doors...... - Gila Jorge, 2015-04-11, 12:05
- Check this out...... - TomC, 2015-04-11, 13:59
  - Rumors...an emoloye who works for Marlin spoke up . - Gila Jorge, 2015-04-11, 14:48
    - OLD sillyness from back in 2012-13...The NRA has refuted it - Rob Leahy, 2015-04-11, 15:04
      - It's already happening, regardless of motive. - cas, 2015-04-12, 23:22
- Marlin closing its doors...... - Gary G, 2015-04-12, 10:38
  - Geroge Soros is behind this organization....not Buffet - Gila Jorge, 2015-04-15, 04:39

Highlight of the NRA convention for me - stonewalrus, 2015-04-10, 18:48
- Jim Wilson is fun to spend time with for sure! - Rob Leahy, 2015-04-10, 19:59
  - Got to meet him at a Linebaugh seminar years ago - mcassill, 2015-04-10, 20:34
- Good times! - Hobie, 2015-04-10, 20:29
- Catoosa and I were told at the Cold Steel booth - stonewalrus, 2015-04-10, 21:05
- Highlight of the NRA convention for me - Catoosa, 2015-04-11, 11:14
  - my wife's cousin lives in that county. - stonewalrus, 2015-04-11, 13:25

"Anything was better than M855 in a CQB environment. " - mcassill, 2015-04-10, 17:45
- Interesting. Thx! - brionic, 2015-04-11, 09:49
  - PSA, of all places, actually has Mk318 in stock - mcassill, 2015-04-11, 15:33

Interesting - Drago, 2015-04-09, 11:16
- this will be interesting ...... - John Meeker, 2015-04-09, 17:58
- I agree, it will be interesting, but...... - Glen, 2015-04-09, 20:45
  - I agree, it will be interesting, but...... - Slow Hand, 2015-04-10, 10:24
- OMG!! BAN IT! BAN IT! - cas, 2015-04-09, 23:38

Something you don't see every day... - Hoot, 2015-04-09, 07:40
- Oh my. - mcassill, 2015-04-09, 07:49
- Very interesting! - Slow Hand, 2015-04-09, 08:27
  - Just proportioning the picture... - Hoot, 2015-04-09, 08:59
    - Just proportioning the picture... - Slow Hand, 2015-04-09, 11:22
- Wouldn't that be a SBR? - Hobie, 2015-04-09, 09:27
  - SBR? Yessirree Bob. - Miles, 2015-04-10, 10:59
- Jeremy Watts could make one on a long weekend. Very cool! - Rob Leahy, 2015-04-09, 10:04
  - I'm waiting for the Watts family to build - MR, 2015-04-09, 11:10
- Something you don't see every day... - Brian A, 2015-04-09, 11:42
  - Agreed. - Hoot, 2015-04-09, 12:39
    - If... - Brian A, 2015-04-09, 20:44
- Vunder-ful!! Thanks for that one... - John Meeker, 2015-04-09, 12:01
- I don't care if it's legal or not, it is very well done! - Rob Leahy, 2015-04-09, 15:55

Don't look Rob.... - Hoot, 2015-04-09, 06:14
- LGS had a Navy Arms Enfield 45-70. - Andrew, 2015-04-09, 07:22
  - There was a fella who used to haul one of those around to... - Hoot, 2015-04-09, 09:02
- If I still had moose sleeping in my yard/eating out of - Rob Leahy, 2015-04-09, 09:50
  - It was more just to tease you than a proposal. - Hoot, 2015-04-09, 12:40

Smith 60-15 3" - Slow Hand, 2015-04-08, 13:22
- Smith 60-15 3" - John Meeker, 2015-04-08, 13:45
  - Smith 60-15 3" - uncowboy, 2015-04-08, 14:56
- I love my 3" M60...It is one of the few guns I keep pachmayr - Rob Leahy, 2015-04-08, 16:48
  - I love my 3" M60...It is one of the few guns I keep pachmayr - Rgates, 2015-04-09, 09:24
    - Those are from the far east. they actaully reside on a m640 - Rob Leahy, 2015-04-09, 09:57
      - Speagal boot grips go well with J's - John Meeker, 2015-04-09, 12:04
- Looks like I was too late... - Slow Hand, 2015-04-09, 11:24
- Smith 60-15 3" - Cherokee, 2015-04-09, 14:49
- Smith 60-15 3" - Remington40x, 2015-04-09, 16:16
- 3" Model 36 Chief Special - Charles, 2015-04-09, 19:38
  - 3" Model 36 Chief Special - Catoosa, 2015-04-11, 10:01

Elmer Keith Audio interviews - Eaglepoint, 2015-04-08, 08:40
- Cool - thanks! - Boge Quinn, 2015-04-08, 09:05
- Very cool, thank you.... - Brian A, 2015-04-08, 10:06
- Wow! Cool stuff! - Caz, 2015-04-08, 20:18
- Elmer Keith had an interesting sounding voice - AkRay, 2015-04-08, 21:41
- Thank you! - TL in OR, 2015-04-09, 00:35
- I enjoyed that very much! - Hoot, 2015-04-09, 07:29
  - I enjoyed that very much! - Bob Hatfield, 2015-04-09, 18:10
    - I enjoyed that very much! - cas, 2015-04-10, 00:18
    - I enjoyed that very much! - Paul, 2015-04-10, 09:35
      - Id go back to that day too...fast! - rob, 2015-04-14, 23:32

New photo booth - Rob Leahy, 2015-04-07, 20:26
- New photo booth - Cherokee, 2015-04-07, 21:36
- in case of emergency break glass - Fowler, 2015-04-07, 23:51
  - HAH! good un! - Rob Leahy, 2015-04-08, 11:10
- Very nice!... nm - Brian A, 2015-04-08, 09:52

HarryO - here's one for you... - Paul, 2015-04-07, 06:00
- That's neat. - Hoot, 2015-04-07, 06:09
- HarryO - here's one for you... - Harry O-1, 2015-04-12, 10:10