Star luber/sizer
by Slow Hand 
, Indiana, Monday, January 28, 2019, 17:38 (2063 days ago) @ Cherokee
Thanks, guys. I have seen the tip on putting a lubed bullet through every few bullets.
Do either of you have Lathesmith’s email? I know I’ve got a login over at the cast bullets site, but I have no idea what it is! I’d like to get a .452 die.
It does have a heater as well, I forgot to mention that.
Complete thread:
- Star luber/sizer -
Slow Hand,
2019-01-27, 18:34
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- Star luber/sizer -
Mark,
2019-01-28, 05:55
- Star luber/sizer -
Cherokee,
2019-01-28, 07:03
- Star luber/sizer -
Slow Hand,
2019-01-28, 17:38
- Star luber/sizer - Mark, 2019-01-29, 05:53
- Star luber/sizer -
Slow Hand,
2019-01-28, 17:38
- Star luber/sizer -
Cherokee,
2019-01-28, 07:03
- Star luber/sizer - uncowboy, 2019-01-28, 07:07
- Star luber/sizer -
John K.,
2019-01-28, 07:58
- Ballisticast sizer. -
MS,
2019-01-28, 12:14
- No need for a PID controller. -
John K.,
2019-01-28, 17:35
- Thanks John, I would appreciate that - MS, 2019-01-29, 08:49
- No need for a PID controller. -
John K.,
2019-01-28, 17:35
- Star luber/sizer -
Slow Hand,
2019-01-28, 17:44
- Sounds like you're in business, Doug. -
John K.,
2019-01-28, 17:59
- Sounds like you're in business, Doug. - Slow Hand, 2019-01-28, 18:10
- Sounds like you're in business, Doug. -
John K.,
2019-01-28, 17:59
- Ballisticast sizer. -
MS,
2019-01-28, 12:14
- Star luber/sizer Dies-email -
Cherokee,
2019-01-28, 21:09
- Star luber/sizer Dies-email - Slow Hand, 2019-01-29, 04:13
- Star luber/sizer -
Creeker,
2019-01-30, 13:55
- Lynn, do you pre-load those tubes off the machine? -
John K.,
2019-01-31, 20:06
- Lynn, do you pre-load those tubes off the machine? -
Creeker,
2019-01-31, 20:24
- Good method. - John K., 2019-01-31, 20:46
- Lynn, do you pre-load those tubes off the machine? -
Creeker,
2019-01-31, 20:24
- Star luber/sizer -
Slow Hand,
2019-02-01, 17:47
- Star luber/sizer - Creeker, 2019-02-01, 18:06
- Lynn, do you pre-load those tubes off the machine? -
John K.,
2019-01-31, 20:06
- Star luber/sizer -
Mark,
2019-01-28, 05:55