If you remove the plate on top of the ram
John nailed it right on the head:
If you remove the plate on top of the ram, it should be re-aligned with the dies. Dillon makes a simple tool for this.
This is a very important step. Get the little tool from Dillon so you can do it right.
Complete thread:
- Dillon 550 question... -
Bryan,
2016-12-31, 22:15
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- I keep degreasing and flushing with light oil... - Bryan, 2016-12-31, 22:32
- Yes I have..... -
Gunner,
2016-12-31, 22:32
- I was looking for a video how to. Haven't found it yet. NT -
Bryan,
2016-12-31, 22:33
- Dillon reloading group on FB NT - Rob Leahy, 2017-01-01, 07:07
- I was looking for a video how to. Haven't found it yet. NT -
Bryan,
2016-12-31, 22:33
- Dillon 550 question... -
RidinLou,
2016-12-31, 23:10
- Right...all that is in good order... -
Bryan,
2016-12-31, 23:17
- Got it! Cleaning everything now. Has to help. NT - Bryan, 2016-12-31, 23:31
- Right...all that is in good order... -
Bryan,
2016-12-31, 23:17
- the free rebuild is a good bet.nt - Rob Leahy, 2017-01-01, 07:24
- Dillon 550 question... -
John K.,
2017-01-01, 08:23
- Dillon 550 question... -
uncowboy,
2017-01-01, 09:28
- Got it going again. Thanks all. Used 3 in 1 oil. NT -
Bryan,
2017-01-01, 09:42
- Got it going again. Thanks all. Used 3 in 1 oil. NT -
RidinLou,
2017-01-01, 10:50
- WD40 does that - Slow Hand, 2017-01-01, 20:35
- Got it going again. Thanks all. Used 3 in 1 oil. NT -
RidinLou,
2017-01-01, 10:50
- Got it going again. Thanks all. Used 3 in 1 oil. NT -
Bryan,
2017-01-01, 09:42
- If you remove the plate on top of the ram - anachronism, 2017-01-02, 11:11
- Dillon 550 question... -
uncowboy,
2017-01-01, 09:28