I added the RCBS swaging dies to my Midway...
by Cherokee 
, Medina, Ohio, Wednesday, October 01, 2014, 07:41 (3711 days ago) @ rob
When using the RCBS swager set, be careful to not get to much pressure on the rod that presses on the inside base of the case, they will bend. Years ago I bought the Dillon, it works great but does cost more.
Complete thread:
- How is a Hornady primer pocket reamer supposed to work? -
rob,
2014-09-30, 19:11
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- How is a Hornady primer pocket reamer supposed to work? -
Jared,
2014-09-30, 20:49
- that's how I thought it was supposed to work... -
rob,
2014-09-30, 20:53
- without some kid of positive stop it sounds pretty useless. -
Jared,
2014-09-30, 21:10
- I think it's just too big... - rob, 2014-09-30, 22:06
- without some kid of positive stop it sounds pretty useless. -
Jared,
2014-09-30, 21:10
- that's how I thought it was supposed to work... -
rob,
2014-09-30, 20:53
- How is a Hornady primer pocket reamer supposed to work? -
Hobie,
2014-09-30, 22:43
- I added the RCBS swaging dies to my Midway... -
rob,
2014-09-30, 22:49
- I added the RCBS swaging dies to my Midway... - Cherokee, 2014-10-01, 07:41
- I added the RCBS swaging dies to my Midway... - Jared, 2014-10-01, 22:28
- I added the RCBS swaging dies to my Midway... -
rob,
2014-09-30, 22:49
- Back when Ford was president -
John K.,
2014-10-01, 14:09
- My first job, for no pay, was in a small reloading/gun shop. -
Rob Leahy,
2014-10-01, 15:07
- Properly set up the RCBS unit is quicker than the - Hobie, 2014-10-01, 15:45
- My first job, for no pay, was in a small reloading/gun shop. -
Rob Leahy,
2014-10-01, 15:07
- How is a Hornady primer pocket reamer supposed to work? -
Paul,
2014-10-01, 16:46
- yep, except its threaded on the end with no handle... - rob, 2014-10-01, 18:30
- How is a Hornady primer pocket reamer supposed to work? -
Jared,
2014-09-30, 20:49