Hey Miles, is this what you're talking about?
by rob 
, Thursday, September 18, 2014, 07:21 (3724 days ago) @ Miles
http://www.brownells.com/gun-cleaning-chemicals/oils-lubricants/lubricant-protectant-oi...
This sounds like good stuff and they say it's good for aluminum as well. What's strange is my Armalite AR15 says absolutely do not use any moly products for lube because it erodes the aluminum. I have a hard time buying that but I quite using moly grease on it just the same. I've used that Sta-Lube automotive moly grease for years for cast bullet lube as well as the bolt lugs on my rifles and my AR bolt before I noticed that in the manual. I still use it on everything but the AR.
Complete thread:
- Weird...I put a Glock 3.5 Minus trigger bar in my 19... -
rob,
2014-09-17, 13:05
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- Ok...stubborn image loader... - rob, 2014-09-17, 13:07
- Define "worse" -
Miles,
2014-09-17, 13:44
- The original pull has a fairly abrupt let off... -
rob,
2014-09-17, 15:58
- Well, you only 'loose' 1 pound of pull with a - connector -
Miles,
2014-09-17, 16:47
- Yeah, my terminology was off a bit... - rob, 2014-09-17, 23:36
- Well, you only 'loose' 1 pound of pull with a - connector -
Miles,
2014-09-17, 16:47
- The original pull has a fairly abrupt let off... -
rob,
2014-09-17, 15:58
- Weird...I put a Glock 3.5 Minus trigger bar in my 19... -
Sarge,
2014-09-17, 22:12
- I put the factory connector back in... -
rob,
2014-09-17, 23:30
- I put the factory connector back in... -
Miles,
2014-09-18, 00:55
- That's the plan... - rob, 2014-09-18, 07:06
- Hey Miles, is this what you're talking about? -
rob,
2014-09-18, 07:21
- Hey Miles, is this what you're talking about? -
Paul,
2014-09-18, 10:54
- Hey Miles, is this what you're talking about? -
rob,
2014-09-18, 10:56
- Hey Miles, is this what you're talking about? - Paul, 2014-09-18, 11:05
- Hey Miles, is this what you're talking about? Yes, that's it - Miles, 2014-09-18, 13:29
- Hey Miles, is this what you're talking about? -
rob,
2014-09-18, 10:56
- Moly isn't the problem with Aluminum, Graphite is. -
Miles,
2014-09-18, 13:32
- Now that you mention it... - rob, 2014-09-18, 14:35
- I mixed a dab of USGI lubrication grade moly into... - rob, 2014-09-19, 07:13
- Hey Miles, is this what you're talking about? -
Paul,
2014-09-18, 10:54
- I put the factory connector back in... -
Miles,
2014-09-18, 00:55
- I put the factory connector back in... -
rob,
2014-09-17, 23:30