The original pull has a fairly abrupt let off...
by rob 
, Wednesday, September 17, 2014, 15:58 (3661 days ago) @ Miles
I have to really concentrate when dry firing with one hand to not jerk the front sight to the right when the trigger finally breaks. With the 3.5 Minus it's even more abrupt and it pulls the front sight right three times as far no matter how hard I concentrate. I put the original back in for now. It's almost tolerable like it is and will probably wear in. I'm not sure why the 3.5 bar didn't improve it some.
Complete thread:
- Weird...I put a Glock 3.5 Minus trigger bar in my 19... -
rob,
2014-09-17, 13:05
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- Ok...stubborn image loader... - rob, 2014-09-17, 13:07
- Define "worse" -
Miles,
2014-09-17, 13:44
- The original pull has a fairly abrupt let off... -
rob,
2014-09-17, 15:58
- Well, you only 'loose' 1 pound of pull with a - connector -
Miles,
2014-09-17, 16:47
- Yeah, my terminology was off a bit... - rob, 2014-09-17, 23:36
- Well, you only 'loose' 1 pound of pull with a - connector -
Miles,
2014-09-17, 16:47
- The original pull has a fairly abrupt let off... -
rob,
2014-09-17, 15:58
- Weird...I put a Glock 3.5 Minus trigger bar in my 19... -
Sarge,
2014-09-17, 22:12
- I put the factory connector back in... -
rob,
2014-09-17, 23:30
- I put the factory connector back in... -
Miles,
2014-09-18, 00:55
- That's the plan... - rob, 2014-09-18, 07:06
- Hey Miles, is this what you're talking about? -
rob,
2014-09-18, 07:21
- Hey Miles, is this what you're talking about? -
Paul,
2014-09-18, 10:54
- Hey Miles, is this what you're talking about? -
rob,
2014-09-18, 10:56
- Hey Miles, is this what you're talking about? - Paul, 2014-09-18, 11:05
- Hey Miles, is this what you're talking about? Yes, that's it - Miles, 2014-09-18, 13:29
- Hey Miles, is this what you're talking about? -
rob,
2014-09-18, 10:56
- Moly isn't the problem with Aluminum, Graphite is. -
Miles,
2014-09-18, 13:32
- Now that you mention it... - rob, 2014-09-18, 14:35
- I mixed a dab of USGI lubrication grade moly into... - rob, 2014-09-19, 07:13
- Hey Miles, is this what you're talking about? -
Paul,
2014-09-18, 10:54
- I put the factory connector back in... -
Miles,
2014-09-18, 00:55
- I put the factory connector back in... -
rob,
2014-09-17, 23:30