Those "pits" almost appear to be staking of circular
Now that I look closer, that lower mark in particular appears to have a slightly raised edge around it. Rake a fingernail across it and see if that is the case. I don't believe a gas cut would have a reaise edge like that.
I'll look at the bolt on my Arisaka after while, but I'm almost certain that it does not have a bushed firing pin hole.
Complete thread:
- Arisaka fired cartridges and bolt face pics -
Paul,
2016-04-24, 18:13
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- Arisaka fired cartridges and bolt face pics -
Cherokee,
2016-04-24, 19:03
- Those pits won't cause any problems.... -
JD,
2016-04-25, 14:55
- Those pits won't cause any problems.... - Cherokee, 2016-04-26, 15:59
- Those pits won't cause any problems.... -
JD,
2016-04-25, 14:55
- Arisaka fired cartridges and bolt face pics - RidinLou, 2016-04-24, 19:16
- Those "pits" almost appear to be staking of circular -
Hobie,
2016-04-25, 06:28
- They do seem to be too regularly shaped to be damage. -
Hoot,
2016-04-25, 07:09
- I had to find a bolt for a friend and it was a real chore. - Hobie, 2016-04-25, 22:52
- Those "pits" almost appear to be staking of circular - Catoosa, 2016-04-25, 10:11
- They do seem to be too regularly shaped to be damage. -
Hoot,
2016-04-25, 07:09
- Arisaka fired cartridges and bolt face pics -
Catoosa,
2016-04-25, 10:02
- I have a few rifles with MUCH worse looking bolts. -
cas,
2016-04-25, 17:55
- I have a few rifles with MUCH worse looking bolts. - Steve k, 2016-04-26, 12:34
- I have a few rifles with MUCH worse looking bolts. -
cas,
2016-04-25, 17:55
- Arisaka fired cartridges and bolt face pics - Brian A, 2016-04-27, 04:24
- Arisaka fired cartridges and bolt face pics - RidinLou, 2016-04-28, 11:05
- Arisaka fired cartridges and bolt face pics -
Cherokee,
2016-04-24, 19:03