Cold Blue
by Slow Hand 
, Indiana, Wednesday, May 28, 2014, 06:40 (3775 days ago) @ Drago
I've had good luck with Birchwood Casey's paste. I haven't got a shiny finish, but the paste seems to stick and soak in better. I agree with the heating first. A heat gun works well or even a hair dryer.
Complete thread:
- Cold Blue -
Drago,
2014-05-27, 21:28
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- Oxphoblue - Brownell's - Hobie, 2014-05-27, 22:23
- Heat the part before you apply the cold blue. -
Rob Leahy,
2014-05-27, 23:29
- Heat gun? -
Drago,
2014-05-28, 01:33
- i use a torch but a Heat gun should do it. - Rob Leahy, 2014-05-28, 11:13
- Heat gun? -
Drago,
2014-05-28, 01:33
- Cold Blue -
Slow Hand,
2014-05-28, 06:40
- Of BC's products, the paste does work best. - Hobie, 2014-05-28, 11:05
- heat gun or boiling h2o you don't want the metal so hot it - ERSisk, 2014-05-28, 19:15
- Van's. Hands down. - Catoosa, 2014-05-29, 10:00