Cold Blue
I have a S&W Airweight 37 that the cylinder and the barrel is more gray than blue. I was thinking I could cold blue the parts, but have had mixed results in the past with cold bluing. What brand do you guys recommend and what procedure do you use in its application?
Complete thread:
- Cold Blue -
Drago,
2014-05-27, 21:28
- Oxphoblue - Brownell's - Hobie, 2014-05-27, 22:23
- Heat the part before you apply the cold blue. -
Rob Leahy,
2014-05-27, 23:29
- Heat gun? -
Drago,
2014-05-28, 01:33
- i use a torch but a Heat gun should do it. - Rob Leahy, 2014-05-28, 11:13
- Heat gun? -
Drago,
2014-05-28, 01:33
- Cold Blue -
Slow Hand,
2014-05-28, 06:40
- Of BC's products, the paste does work best. - Hobie, 2014-05-28, 11:05
- heat gun or boiling h2o you don't want the metal so hot it - ERSisk, 2014-05-28, 19:15
- Van's. Hands down. - Catoosa, 2014-05-29, 10:00