1911 230 cast TC advice needed...
by Cherokee 
, Medina, Ohio, Saturday, September 21, 2013, 14:47 (4086 days ago) @ rob
I shoot the TC design 90% of the time in my 45 ACP's. I have settled on 1.185" OAL so the load will function in various 45's of 1911, XDM, PD, etc. Some will take a longer OAL but accross the board 1.185" works for me. That is with the Lee TC conventional lube TC bullet and my old NEI TC design. I use 231 and WST in my loads established many years ago.
Complete thread:
- 1911 230 cast TC advice needed... -
rob,
2013-09-20, 14:14
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- 1911 230 cast TC advice needed... -
the Alsatian,
2013-09-20, 18:37
- The problem with these truncated cone bullets... - rob, 2013-09-20, 23:25
- This might be helpful... -
Sarge,
2013-09-20, 20:32
- I forgot about that... - rob, 2013-09-20, 23:30
- 1911 230 cast TC advice needed... - Charles, 2013-09-21, 12:10
- 1911 230 cast TC advice needed... -
Cherokee,
2013-09-21, 14:47
- That's the same mould I have... - rob, 2013-09-21, 23:00
- 1911 230 cast TC advice needed... -
the Alsatian,
2013-09-20, 18:37