1911 problem
Is there a burr on the firing pin hole in the slide? Maybe see if you can't find a slightly smaller drill but and turn it in there by hand also a good scrubbing out of the firing pins hole/slot would be a good idea if you haven't already done it you could stick a cotton swab in the hole and spin it to see if it pulls any cotton off of it, indicating a burr.
Complete thread:
- 1911 problem -
Leatherbark (Bob Hatfield),
2013-08-10, 09:06
- 1911 problem -
Slow Hand,
2013-08-10, 09:58
- 1911 problem - woody, 2013-08-10, 10:17
- 1911 problem - Charles, 2013-08-10, 15:19
- It is an inertial firing pin, so it travels further forward -
John K.,
2013-08-10, 15:29
- It is an inertial firing pin, so it travels further forward - Catoosa, 2013-08-10, 21:47
- 1911 problem -
Slow Hand,
2013-08-10, 09:58