Frankly it's doesn't sound as loud as a 16 inch AR .223
I'm happy either way. It rides next to my leg in the pick up really well with out the added length of the suppressor.
As my niece used to say when she was about 3. "My Mama say we see."
Complete thread:
- YO HOOT! Well Crap. Half Crap Anyway. -
MR,
2013-07-20, 18:25
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- My money is on off-axis threads and shoulder. -
John K.,
2013-07-20, 18:30
- John I know they used a lathe. -
MR,
2013-07-20, 19:00
- Try this - with the barrel off, thread the can on and -
John K.,
2013-07-20, 19:06
- Try this - with the barrel off, thread the can on and -
Slow Hand,
2013-07-20, 23:45
- Tried that. At 10 yards it makes round holes. -
MR,
2013-07-21, 09:48
- Tried that. At 10 yards it makes round holes. - Slow Hand, 2013-07-21, 11:01
- Tried that. At 10 yards it makes round holes. -
MR,
2013-07-21, 09:48
- Try this - with the barrel off, thread the can on and -
Slow Hand,
2013-07-20, 23:45
- Try this - with the barrel off, thread the can on and -
John K.,
2013-07-20, 19:06
- Yep. Just because they use the right methodology doesn't -
Hobie,
2013-07-21, 12:20
- I know Hobie. He's done every thing else I've had done -
MR,
2013-07-21, 15:29
- I hope that it is an easy fix. I suppose we are -
Hobie,
2013-07-21, 18:46
- In the mean time. -
MR,
2013-07-22, 15:30
- Worst case, it has to be re-threaded. Those guys -
John K.,
2013-07-22, 18:18
- -> John "4 jaw indexed" - MR, 2013-07-23, 15:41
- Worst case, it has to be re-threaded. Those guys -
John K.,
2013-07-22, 18:18
- In the mean time. -
MR,
2013-07-22, 15:30
- I hope that it is an easy fix. I suppose we are -
Hobie,
2013-07-21, 18:46
- I know Hobie. He's done every thing else I've had done -
MR,
2013-07-21, 15:29
- John I know they used a lathe. -
MR,
2013-07-20, 19:00
- Sorry to hear of your "challenge" Mark. -
Hoot,
2013-07-23, 21:01
- Frankly it's doesn't sound as loud as a 16 inch AR .223 - MR, 2013-07-23, 22:24
- My money is on off-axis threads and shoulder. -
John K.,
2013-07-20, 18:30