I hope that it is an easy fix. I suppose we are
by Hobie 
, Shenandoah Valley of Virginia, Sunday, July 21, 2013, 18:46 (4147 days ago) @ MR
presuming that the can isn't wrong in that area.
--
Sincerely,
Hobie
Complete thread:
- YO HOOT! Well Crap. Half Crap Anyway. -
MR,
2013-07-20, 18:25
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- My money is on off-axis threads and shoulder. -
John K.,
2013-07-20, 18:30
- John I know they used a lathe. -
MR,
2013-07-20, 19:00
- Try this - with the barrel off, thread the can on and -
John K.,
2013-07-20, 19:06
- Try this - with the barrel off, thread the can on and -
Slow Hand,
2013-07-20, 23:45
- Tried that. At 10 yards it makes round holes. -
MR,
2013-07-21, 09:48
- Tried that. At 10 yards it makes round holes. - Slow Hand, 2013-07-21, 11:01
- Tried that. At 10 yards it makes round holes. -
MR,
2013-07-21, 09:48
- Try this - with the barrel off, thread the can on and -
Slow Hand,
2013-07-20, 23:45
- Try this - with the barrel off, thread the can on and -
John K.,
2013-07-20, 19:06
- Yep. Just because they use the right methodology doesn't -
Hobie,
2013-07-21, 12:20
- I know Hobie. He's done every thing else I've had done -
MR,
2013-07-21, 15:29
- I hope that it is an easy fix. I suppose we are -
Hobie,
2013-07-21, 18:46
- In the mean time. -
MR,
2013-07-22, 15:30
- Worst case, it has to be re-threaded. Those guys -
John K.,
2013-07-22, 18:18
- -> John "4 jaw indexed" - MR, 2013-07-23, 15:41
- Worst case, it has to be re-threaded. Those guys -
John K.,
2013-07-22, 18:18
- In the mean time. -
MR,
2013-07-22, 15:30
- I hope that it is an easy fix. I suppose we are -
Hobie,
2013-07-21, 18:46
- I know Hobie. He's done every thing else I've had done -
MR,
2013-07-21, 15:29
- John I know they used a lathe. -
MR,
2013-07-20, 19:00
- Sorry to hear of your "challenge" Mark. -
Hoot,
2013-07-23, 21:01
- Frankly it's doesn't sound as loud as a 16 inch AR .223 - MR, 2013-07-23, 22:24
- My money is on off-axis threads and shoulder. -
John K.,
2013-07-20, 18:30