Fivegunner - second batch, 100ea 45-90 black powder
Ran for one hour at 40rpm. Big difference; the first batch, at 24rpm, cleaning had barely started at one hour. This batch was clean when first checked at one hour. Even the primer pockets.
![[image]](http://home.comcast.net/~johnk454/pics/BPbrass1.jpg)
![[image]](http://home.comcast.net/~johnk454/pics/BPbrass2.jpg)
![[image]](http://home.comcast.net/~johnk454/pics/BPbrass3.jpg)
![[image]](http://home.comcast.net/~johnk454/pics/BPbrass4.jpg)
Complete thread:
- Stainless pin tumbling update. -
John K.,
2013-06-28, 13:37
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- Who'd a thought that you would overbuild:-) -
Rob Leahy,
2013-06-28, 13:49
- Who'd a thought that you would overbuild:-) - John K., 2013-06-28, 16:58
- Stainless pin tumbling update. -
Cherokee,
2013-06-28, 14:10
- Thanks! You jogged my memory, when I was about - John K., 2013-06-28, 16:55
- Stainless pin tumbling update. -
Fivegunner,
2013-06-28, 15:19
- An old treadmill would be an excellent starting point. -
John K.,
2013-06-28, 16:41
- Tumbled that 100 piece batch of BP 45-90 cases for -
John K.,
2013-06-28, 17:52
- Fivegunner - second batch, 100ea 45-90 black powder -
John K.,
2013-06-29, 17:04
- Fivegunner - second batch, 100ea 45-90 black powder -
Fivegunner,
2013-06-29, 19:10
- I recommend three paddles equally spaced as a minimum nm - erssk, 2013-06-29, 21:14
- Fivegunner - second batch, 100ea 45-90 black powder -
Fivegunner,
2013-06-29, 19:10
- Fivegunner - second batch, 100ea 45-90 black powder -
John K.,
2013-06-29, 17:04
- Tumbled that 100 piece batch of BP 45-90 cases for -
John K.,
2013-06-28, 17:52
- An old treadmill would be an excellent starting point. -
John K.,
2013-06-28, 16:41
- Who'd a thought that you would overbuild:-) -
Rob Leahy,
2013-06-28, 13:49