Best method for improving Glock Trigger?

by Miles Fortis , CIVITATES AMERICAE, Friday, August 31, 2012, 15:21 (4469 days ago) @ rob

1 Install a Scherer minus (-) connector.

2 Buy a Wolff trigger group competition pak. Throw away the striker spring, use only the striker safety and trigger spring in the kit. The striker spring is just light enough to randomly fail to set off primers.

3 Now here comes the fun part. This risks the striker and trigger with bar parts so buy spares. Using a hard Arkansas stone, polish the flat end and angle of the striker safety, the safety depressor on the trigger bar, the end of the trigger bar and the tang of the striker and the end of the trigger bar where is rides on the connector to as close a mirror finish as possible without removing so much metal that the gun will not function.

4 Be prepared to change out parts at the first sign of the trigger pull 'going south' (but the life span of these mods is currently measured in the 'several thousands' of rounds so far).

Don't ask where the technique was developed, or who uses it.

Probably for your purposes, 1 and 2 will suffice.

I did not say this. I am not here!