9mm on the Dillon 550B....
All Dillon presses need to have their platform realigned every so often. Dillon has an alignment tool for this. Trust me, you need to do this periodically:
Dillon Platform Alignment
More 550 videos: www.dillonprecision.com/rl550-product-videos.html]Dillon Videos[/link]
The cleaning and lubrication video is worth watching at least twice. There is also a primer track guide offered by Dillon and Uniquetek that's a flat steel plate for the primer shuttle to ride on. If your shuttle is only riding on bare aluminum you can get hitches and jimmies that cause the primers to flip in the cup.
Bob
Complete thread:
- 9mm on the Dillon 550B.... -
Gunner,
2024-06-23, 13:18
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- Give Dillon a call. - E Sisk, 2024-06-23, 13:35
- I have found a lot of difference in 9mm cases. -
JimT,
2024-06-23, 14:15
- I have found a lot of difference in 9mm cases. -
Gunner,
2024-06-23, 16:55
- I was given about 2500 cases and then picked up another -
JimT,
2024-06-23, 17:25
- At least at one point - A K Church, 2024-06-24, 10:57
- what brand of primers are you using? -
Rob Leahy,
2024-06-26, 22:49
- what brand of primers are you using? - Gunner, 2024-06-26, 23:10
- I was given about 2500 cases and then picked up another -
JimT,
2024-06-23, 17:25
- I have found a lot of difference in 9mm cases. -
Gunner,
2024-06-23, 16:55
- 9mm on the Dillon 550B.... -
Creeker,
2024-06-24, 09:30
- 9mm on the Dillon 550B.... -
anachronism,
2024-07-06, 18:22
- 9mm on the Dillon 550B.... - Creeker, 2024-07-07, 18:03
- 9mm on the Dillon 550B.... -
anachronism,
2024-07-06, 18:22