It should bolt right up ..
but if you keep the SBH trigger which is wide, you will have to open up the trigger opening on the XR3-RED grip frame or swap for a narrow width trigger.
Complete thread:
- Converting Super Blackhawk square Dragoon gf to XR3-R... -
rob,
2017-10-26, 20:17
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- It should bolt right up .. -
Robb BArnes,
2017-10-26, 20:50
- Good point on the trigger! - rob, 2017-10-26, 21:01
- Brownells has this New Vaquero grip frame that... -
rob,
2017-10-26, 21:06
- On second thought... -
rob,
2017-10-26, 21:24
- On third thought.... -
rob,
2017-10-26, 21:37
- I converted a Standard New Model Blackhawk in 45 to Bisley -
stonewalrus,
2017-10-27, 07:55
- The clamp makes it SO much easier! The first couple of time -
Hobie,
2017-10-27, 09:32
- I could never get it right by myself without the clamp -
stonewalrus,
2017-10-27, 16:59
- I could never get it right by myself without the clamp -
RidinLou,
2017-10-28, 12:50
- Yes that is a multi purpose spring. There is a little rattle - stonewalrus, 2017-10-28, 15:47
- I could never get it right by myself without the clamp -
RidinLou,
2017-10-28, 12:50
- I could never get it right by myself without the clamp -
stonewalrus,
2017-10-27, 16:59
- The clamp makes it SO much easier! The first couple of time -
Hobie,
2017-10-27, 09:32
- I converted a Standard New Model Blackhawk in 45 to Bisley -
stonewalrus,
2017-10-27, 07:55
- On third thought.... -
rob,
2017-10-26, 21:37
- On second thought... -
rob,
2017-10-26, 21:24
- I probably have the parts you need email me - ERSisk, 2017-10-27, 12:00
- I have an XR3 R al grip frame, not new but very good -
Cherokee,
2017-10-27, 15:14
- Envelope doesn't sshow up so - Cherokee, 2017-10-27, 15:15
- I have an XR3 R al grip frame, not new but very good - rob, 2017-10-27, 21:06
- It should bolt right up .. -
Robb BArnes,
2017-10-26, 20:50