Going to check with Ruger and see what they say.
by ERSisk 
, Tuesday, May 16, 2017, 22:20 (2685 days ago) @ Catoosa
I want to try turning the barrel to line everything up. But I have a couple of concerns. Stainless steel on stainless steel threaded connections have a tendency to gall. Is the reason the barrel is not turned in all the way to line up the sights is the threads have galled? Will I be able to unthread the barrel without galling the threads?
Complete thread:
- Ruger Single 10 report -
ERSisk,
2017-05-13, 23:30
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- I had an Accusport Bisley... - rob, 2017-05-14, 08:41
- Ruger Single 10 report -
Catoosa,
2017-05-15, 09:42
- Going to check with Ruger and see what they say. -
ERSisk,
2017-05-16, 22:20
- Going to check with Ruger and see what they say. -
Catoosa,
2017-05-17, 09:27
- Front is off center turning barrel will center both f & r -
ERSisk,
2017-05-17, 20:27
- Front is off center turning barrel will center both f & r - Catoosa, 2017-05-17, 22:45
- Front is off center turning barrel will center both f & r -
ERSisk,
2017-05-17, 20:27
- Going to check with Ruger and see what they say. -
Catoosa,
2017-05-17, 09:27
- Going to check with Ruger and see what they say. -
ERSisk,
2017-05-16, 22:20
- Ruger Single 10 report: What happened? - Mike P, 2018-03-21, 13:07