update so far.
So I checked boltface and it has two tiny elongated pits around the firing pin hole. Paul I could email you a pic if you went to post it here. Let me know. The rim fits under the extractor a little loose, but it stays there and won't fall out. Also I haven't had any extraction problems at any point (sticky bolt, stuck cases, failures to extract). As far as headspace goes I don't know of anyone making any gauges.
Complete thread:
- Fired primer damage question...... -
John Meeker,
2016-04-19, 19:41
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- Fired primer damage question...... -
uncowboy,
2016-04-19, 20:18
- Will see if I can get that negotiated over to here....will - John Meeker, 2016-04-19, 20:41
- Can't get photo lifted out of mail.....send... - John Meeker, 2016-04-20, 08:47
- More brain dump than experience but... - Hoot, 2016-04-20, 06:19
- Fired primer damage question...... -
Brian A,
2016-04-20, 10:26
- Fired primer damage question...... -
Steve K,
2016-04-20, 12:45
- Fired primer damage question...... -
Paul,
2016-04-20, 15:12
- Fired primer damage question...... -
steve k,
2016-04-20, 15:47
- Common problem... - Paul, 2016-04-20, 17:00
- Fired primer damage question...... -
steve k,
2016-04-20, 15:47
- Fired primer damage question...... - Brian A, 2016-04-20, 22:29
- Fired primer damage question...... -
Paul,
2016-04-20, 15:12
- Fired primer damage question...... -
Steve K,
2016-04-20, 12:45
- Here is a picture of the fired primers... -
Paul,
2016-04-20, 16:54
- headspace issue? - Josh Maloley, 2016-04-20, 17:13
- Hmm.... - Hoot, 2016-04-20, 17:32
- Thanks, Paul.....Steve is one of the good guys....... - John Meeker, 2016-04-20, 21:04
- Here is a picture of the fired primers... - Cherokee, 2016-04-20, 22:00
- Fired primer damage question...... -
Catoosa,
2016-04-21, 11:54
- Fired primer damage question...... -
Steve k,
2016-04-21, 15:08
- Let us know what you find out, please. (nt) -
Paul,
2016-04-21, 20:21
- update so far. -
steve k,
2016-04-23, 09:54
- Send it along, I'll post it for you. (nt) - Paul, 2016-04-23, 10:01
- update so far. - Brian A, 2016-04-23, 17:05
- update so far. -
Catoosa,
2016-04-23, 22:59
- update so far. - steve k, 2016-04-24, 09:03
- update so far. -
steve k,
2016-04-23, 09:54
- Let us know what you find out, please. (nt) -
Paul,
2016-04-21, 20:21
- Fired primer damage question...... -
Steve k,
2016-04-21, 15:08
- Fired primer damage question...... -
uncowboy,
2016-04-19, 20:18