Hmmm...thanks. That hadn't occurred to me.
I would check the rounds in question, could be they are slipping past the shoulder in the chamber causing a headspace issue. Might be an oversize chamber as well, that could cause the same issue. It can be a very fine balance for a manufacturer, make a chamber large enough to accept everything on the market, but not so large as the rounds held to a tighter tolerance don't slip past the shoulder. Can be a big problem for rounds that headspace on the rim.
Complete thread:
- No I didn't attentd a Glock armorer course, BUT I can fix -
Rob Leahy,
2016-04-18, 10:59
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- Rob, a 12 year old can fix any Glock problem. -
Miles,
2016-04-18, 14:59
- Weeelll, I'm older than 12 but haven't got this one figured. -
Hoot,
2016-04-18, 15:33
- Weeelll, I'm older than 12 but haven't got this one figured. -
Brian A,
2016-04-18, 19:18
- Hmmm...thanks. That hadn't occurred to me. -
Hoot,
2016-04-19, 06:02
- Hmmm...thanks. That hadn't occurred to me. -
Brian A,
2016-04-19, 10:54
- Yep, gotcha. -
Hoot,
2016-04-19, 14:08
- Yep, gotcha. -
Brian A,
2016-04-19, 19:20
- The groups varied by roughly 0.003" per grouping. -
Hoot,
2016-04-19, 19:46
- New Glurk, right? -
MS,
2016-04-19, 23:14
- Quite possibly. -
Hoot,
2016-04-20, 06:21
- See? You're smarter than a 12 year old! -
Miles,
2016-04-20, 20:46
- Thanks but... -
Hoot,
2016-04-20, 20:49
- I have no doubt... - Brian A, 2016-04-22, 09:06
- Thanks but... -
Hoot,
2016-04-20, 20:49
- See? You're smarter than a 12 year old! -
Miles,
2016-04-20, 20:46
- Quite possibly. -
Hoot,
2016-04-20, 06:21
- The groups varied by roughly 0.003" per grouping. - Brian A, 2016-04-20, 10:29
- New Glurk, right? -
MS,
2016-04-19, 23:14
- The groups varied by roughly 0.003" per grouping. -
Hoot,
2016-04-19, 19:46
- Yep, gotcha. -
Brian A,
2016-04-19, 19:20
- Yep, gotcha. -
Hoot,
2016-04-19, 14:08
- Hmmm...thanks. That hadn't occurred to me. -
Brian A,
2016-04-19, 10:54
- Hmmm...thanks. That hadn't occurred to me. -
Hoot,
2016-04-19, 06:02
- Should get rid of it and buy 'Mercin! Ruger LC380 -
Rob Leahy,
2016-04-18, 19:20
- We have the LCP, almost since they came out. - Hoot, 2016-04-19, 06:04
- But I though Glocks were perfection... - Jared, 2016-04-18, 19:37
- Weeelll, I'm older than 12 but haven't got this one figured. -
Brian A,
2016-04-18, 19:18
- Weeelll, I'm older than 12 but haven't got this one figured. -
Hoot,
2016-04-18, 15:33
- No I didn't attentd a Glock armorer course, BUT I can fix -
Fivegunner,
2016-04-18, 15:06
- No I didn't attentd a Glock armorer course, BUT I can fix -
Brian A,
2016-04-19, 10:48
- No I didn't attentd a Glock armorer course, BUT I can fix -
Fivegunner,
2016-04-19, 15:45
- No I didn't attentd a Glock armorer course, BUT I can fix - Brian A, 2016-04-20, 10:32
- No I didn't attentd a Glock armorer course, BUT I can fix -
Fivegunner,
2016-04-19, 15:45
- No I didn't attentd a Glock armorer course, BUT I can fix -
Brian A,
2016-04-19, 10:48
- Rob, a 12 year old can fix any Glock problem. -
Miles,
2016-04-18, 14:59