Favorite bulk three five seven bullet...
I have an 5 gallon bucket full of fired three five seven brass that I have be walking around for the past couple of years and have finally decided to crank up the Dillon and get it all reloaded.
Load will be a WW small pistol magnum primer and a case full of 296/H110. Full power .357 Magnum load.
What is the boards favorite .357 bullet? The ammunition will be fired from a mix of Rugers, S&Ws and a couple of carbines.
I am leaning toward the bulk pack 158gr jacketed hollow points from most of the major manufactures.
I want a no muss no fuss setup.
Thanks,
Byron
Check these out
by Cherokee 
, Medina, Ohio, Saturday, July 25, 2015, 13:35 (3413 days ago) @ Byron
edited by Cherokee, Saturday, July 25, 2015, 13:52
I have never used them but they have a good rep...
http://montanagoldbullet.com/index.php/catalogsearch/result/?q=.38
Midway has Magtech 158 JSP for reasonable price.
http://www.midwayusa.com/product/1657168253/magtech-bullets-357-magnum-357-diameter-158...
I never had much luck with the plated bullets in any hot loads.
I use Presisin Delta 9mm JHP for some 9's but 99% my cast for 38/357, even the hot loads.
Favorite bulk three five seven bullet...
by MDF99 , SW Ohio, Saturday, July 25, 2015, 15:05 (3413 days ago) @ Byron
I would consider the Zero brand 158 JHPs at Powder Valley for $192/2000pcs.
Favorite bulk three five seven bullet...
by Hobie 
, Shenandoah Valley of Virginia, Saturday, July 25, 2015, 17:44 (3413 days ago) @ Byron
Even Midway can sell the XTP for $.20 per. That is a lot of brass but I would lean towards a bullet that will satisfy performance wise rather than just price wise. I like the XTPs.
Plated bullets haven't been satisfactory in such loads for me either.
--
Sincerely,
Hobie