Interesting paperweight...
I have on exactly like that one. I tinkered with it several years ago with smokeless. Before I knew about these first models I wondered why it was worn out. It seems the area in the recoil shield where the little ratchet nub fits was so sloppy and the latch was sloppy. I peened the latch some to tighten it up.
I did load some 4f black in the 32 cases as I couldn't get enough 3f in there to even get to 500 fps IIRC. Cant remember what fps the 4 f did. My boolits were too heavy. Seems I was using a 94 grainer.
The smokeless model (3rd) is identified by the Owl head turned different on the grips and regular S&W type cylinder locking notches. But you probably already knew that.
The metal in that first model is very soft
Bob
Complete thread:
- Interesting paperweight... -
stonewalrus,
2014-06-13, 22:01
- Interesting paperweight... -
Cherokee,
2014-06-13, 22:17
- This was near Lebanon, TN - stonewalrus, 2014-06-13, 22:25
- Interesting paperweight... -
Bob Hatfield,
2014-06-14, 06:47
- Interesting paperweight... -
uncowboy,
2014-06-14, 07:35
- This one has quite a bit of cylinder wiggle -
stonewalrus,
2014-06-14, 09:24
- With that type of action - Bob Hatfield, 2014-06-14, 13:35
- This one has quite a bit of cylinder wiggle -
stonewalrus,
2014-06-14, 09:24
- Interesting paperweight... -
uncowboy,
2014-06-14, 07:35
- I have one like that. - Hoot, 2014-06-14, 10:12
- Owl Head. - JLF, 2014-06-14, 11:04
- Interesting paperweight... -
Cherokee,
2014-06-13, 22:17