Tarnish Silver inlays on Blued gun...
Have an engraved Model 12 Pigeon No 5 pattern with silver inlays...gorgeous...but the silver is tarnished a bit....but afraid to go after else ruin the bluing...any suggestions...? Thanks in advance,.,.
Tarnish Silver inlays on Blued gun...
by Slow Hand 
, Indiana, Tuesday, February 11, 2014, 20:46 (3944 days ago) @ Gila Jorge
Something like this should work on the silver but not mess up blueing.
http://www.amazon.com/Blitz-Silver-Care-Polishing-Cloth/dp/B000F1OT6A
There are paste polishes, and the abrasives are very fine, but I'd be leery of using them on a high polish blued finish.
Try a bit of spit and fine cloth..and rubbing..persist. ;~`)
by John Meeker , Wednesday, February 12, 2014, 13:01 (3943 days ago) @ Gila Jorge
if not too bad, it will do the trick. also finely powdered white chalk and spit and cloth -- all very carefully and frequent checks to make sure the blue is not being shaded or highlighted. I'd stick with spit and cloth.
Good ol' Semi-Chrome
by JLF , Wednesday, February 12, 2014, 23:56 (3942 days ago) @ Gila Jorge
Every gun bench should have a tube of Semi-Chrome, and a can of Berryman's B-12. Anything else is optional.
I once bought an engraved blue Smiff 19. Blue all over, nice engraving. I got it home and commenced to polishing it all purty with the Semi-Chrome, and shazam! Silver wire inlay all around the gun that had turned so dark it matched the blue!
JLF