I ran into that same problem . . .
. . . with some .357 Maximum rounds I acquired in a "package" buy. The reload info I got with them scared me to death, so I decided to pull the bullets and start over. The first three I tried to pull with the intertia (hammer) type puller resulted in the same thing you show, and I was afraid I'd break the puller. Fortunately, there were only a dozen or so that were questionable, so I just cut the cases off behind the bullets, dumped the powder, and scrapped the rest. Hated to lose the brass and bullets, but . . .
Very strange. I'd never have believed it if I hasn't seen it myself.
Complete thread:
- Talk about neck tension...photo -
rob,
2013-11-25, 10:46
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- I guess I'll recover the lead cores... -
rob,
2013-11-25, 10:53
- I ran into that same problem . . . -
Kentucky,
2013-11-25, 11:41
- I'm gonna try to find a bolt... -
rob,
2013-11-25, 12:18
- Have you tried seating them deeper to break them loose? -
John K.,
2013-11-25, 12:29
- Yeah...pushed one in about 1/16" but it -
rob,
2013-11-25, 12:51
- Yeah...pushed one in about 1/16" but it -
Slow Hand,
2013-11-25, 12:59
- I thought about it... - rob, 2013-11-25, 13:09
- Yeah...pushed one in about 1/16" but it -
Slow Hand,
2013-11-25, 12:59
- Yeah...pushed one in about 1/16" but it -
rob,
2013-11-25, 12:51
- Maybe you just need to buy a M27... -
Rob Leahy,
2013-11-25, 13:09
- True that! - rob, 2013-11-25, 13:10
- Have you tried seating them deeper to break them loose? -
John K.,
2013-11-25, 12:29
- I'm gonna try to find a bolt... -
rob,
2013-11-25, 12:18
- I ran into that same problem . . . -
Kentucky,
2013-11-25, 11:41
- Talk about neck tension...photo -
Cherokee,
2013-11-25, 18:22
- Brand new Starline brass:) - rob, 2013-11-25, 18:32
- I guess I'll recover the lead cores... -
rob,
2013-11-25, 10:53