New school goes old school...

by Slow Hand ⌂ @, Indiana, Tuesday, January 24, 2012, 18:13 (4687 days ago)

One of SAAMI's newest cartridges goes a bit old school...

[image]

Trying some cast bullets in the .300 whisper. If I can get these to function 100% subsonic I'll get a lot more play time as opposed to shooting 225 BTHP Match bullets. These are 180 gr 311284. I've got a flat nosed 31141 170 gr and a 210 round nosed 311291 I plan on trying out as well. These are mainly for fun plinking at steel with a can so as long as they'll hold 4moa or so I'll be happy. Hope to test some this weekend and finally get some chrono readings on the 225's and the 125 gr Speer TNT's.

New school goes old school...

by Slow Hand ⌂ @, Indiana, Tuesday, January 24, 2012, 18:14 (4687 days ago) @ Slow Hand

One other thing and I'll try and get a pic of it but if you look at them right, the .300blk looks a lot like a scaled down .35 Remington!

what powder?

by bj @, Tuesday, January 24, 2012, 19:56 (4687 days ago) @ Slow Hand

?

Lil' Gun...

by Slow Hand ⌂ @, Indiana, Tuesday, January 24, 2012, 20:03 (4687 days ago) @ bj

The two originally suggested powders were AA 1680 for heavy subsonic loads as Lil Gun for the lighter faster loads. I've used Lil Gun in my 125 and 147 loads. The 147 load was just a swag that he opened to shoot ok and cycle the action. Lots of folk are using H110 now for the lighter loads and even HP38 and Wincheater 231 in manual repeaters. I may try some red dot and unique once I get my bolt action put together. This cast loaf was extrapolated from someone else's 180 jacketed load and honestly seems low but I'll give it a try and go from there.

I would have suggested slower powders

by bj @, Wednesday, January 25, 2012, 21:40 (4686 days ago) @ Slow Hand

It struck me that this cartridge is somewhat similar to what I had loaded at one time in .30 Herrett. The .300Wh case is a bit smaller than .30H, but I was loading 165 grain bullets for silhouette and some people loaded even heavier bullets. I started using powders slower than LilGun, and later moved to even slower powders. My best results were with WW748 which is a lot slower than LilGun. But now that I think about it, if a person was going to use .300Wh for its intended purpose of use with a can, then faster powders might be more appropriate- by reducing pressure at the muzzle and thus muzzle blast, wouldn't it make the can more efficient?

lilgun experience

by Lloyd Smale, Thursday, January 26, 2012, 03:57 (4686 days ago) @ bj

I used lilgun in my beowulf for a few years. It burned clean and gave good accuracy. I got low on it one day and tried wc297 for grins. Well the accuracy was just as good or better and i was fooling around at the range that day and dumped a 8 round clip as fast as i could shoot them. Afterwards you could about have lit a cigerette off the barrel. I let it cool and shot 8 again as fast as i could with 297 and i could actually pick the gun up by the barrel. NO more lilgun for me!

here is another suggestion- 4198

by bj @, Friday, January 27, 2012, 10:02 (4684 days ago) @ Slow Hand

It seems to work well in small cases.

They Do look like 35 Rem cartridges. Anxious to see results

by Rob Leahy ⌂ @, Prescott, Arizona, Tuesday, January 24, 2012, 20:35 (4687 days ago) @ bj

I am thinking a 300 Whisper

--
Of the Troops & For the Troops

RSS Feed of thread

powered by my little forum