Me?

by Mike P , Wednesday, January 11, 2012, 19:09 (4700 days ago) @ Slow Hand

I did it this way:
1 Plane to thickness
2 Fit up tight into trigger/frame corner. I use 'El Marko' type marker on the metal for transfer color, then scrape the color off til it looks like it grew there.
3 Trace the grip with a sharp pencil.. Remove the wood any old way then rasp near the line, like a 64th on an inch.
4 Take the square corners off, then take the resulting corners off, and it's starting to look pretty decent. You are in course sandpaper range here...
5 Leave the last bit along the frame square until the last.

Good luck!
Mike P