Ever seen a left-handed monkey wrench?

by Catoosa, Thursday, January 03, 2013, 22:38 (4288 days ago)

There is a reason why the .25 ACP cartridge has been popular in this country for over a century. Many, many oldtimers, including my grandad, carried a Colt 1908 in their front pants pocket every day. I never knew he had it until shortly before he passed away. We were out in his back yard one day, and he asked me if I had ever seen a left-handed monkey wrench. When I said no, he grinned and pulled the little Colt out of his pocket.

Grandpop Homer grew up rough in rural Georgia in the early 1900s. He was a little guy, but you didn't mess with him if you knew what was good for you. I think the sheriff finally took that Colt away from him after he chased a smart-mouthed yuppie down the town's main street with it when 'way up in his 80s.

Wow, we may be related.

by MR, Friday, January 04, 2013, 09:33 (4287 days ago) @ Catoosa

My Grandad got his Colt .32 Banker's Special taken away when he took it to the bank and waved it around in the 70's because he thought they wouldn't give him all his money. The State Bank Of DeKalb Texas. (pronounced DEE CAB at least by him)

Yep, DEE CAB is the correct pronounciation for we locals.

by Murphy @, Friday, January 04, 2013, 12:23 (4287 days ago) @ MR

If a person were to ask 'How far is it to DEE-KALB from here?' We'd know right off they ain't from roun' these heah' parts.

Its only about 35 miles from my place. For decades its also been known as one of the worse speed traps in the country. How bad? I'll just say for many years it was hard to pass thru DeKalb and NOT see someone getting a ticket.

Triva Note: Hoss Cartwright was born and raised in DeKalb, also his final resting place.

Murphy

He lived between Avery and Annona.

by MR, Friday, January 04, 2013, 16:19 (4287 days ago) @ Murphy

on FM 1701.

It's Dee Cab County here in TN too

by stonewalrus, Friday, January 04, 2013, 14:16 (4287 days ago) @ MR

Nm

passed up a good deal on one last weekend

by stonewalrus, Friday, January 04, 2013, 14:14 (4287 days ago) @ Catoosa

And am now kicking myself.

Anybody know anything about the Taurus PLY 25?

PLY 25??

by Hoot @, Diversityville, Liberal-sota, Friday, January 04, 2013, 20:48 (4287 days ago) @ stonewalrus

Don't knw that'un. Owned a PT 25 for a few years now. A true incapacitating case of the giggles with 209 primers and #3 shot....just sayin'. ;-)

Errrrrrr.. Hoot??

by Catoosa, Friday, January 04, 2013, 21:12 (4287 days ago) @ Hoot

There's a lot of things I don't know, and some I don't want to know, but is there something related to .25 autos and 209 primers and #3 shot that I SHOULD know and don't?

Errrrrrr.. Hoot??

by Slow Hand ⌂ @, Indiana, Friday, January 04, 2013, 21:23 (4287 days ago) @ Catoosa

Put the three together for a fun time! Easier with teh Beretta/Taurus tilt up barrel style action. Drop a roundball in, put a 209 behind that, close action and pull trigger for true popgun performance!

I made up some .22 Hornet shells awhile back that would shoot a .22 cal air rifle pellet using a 209 shotsheel primer. that was fun stuff!

Errrrrrr.. Hoot??

by mcassill, Friday, January 04, 2013, 21:46 (4287 days ago) @ Slow Hand

Yup. That combo will ring 50 yard steel easily enough. Might be the best use of a .25.

As Mark and Doug state..

by Hoot @, Diversityville, Liberal-sota, Saturday, January 05, 2013, 08:46 (4286 days ago) @ Catoosa

The #3 shot is .25 dia.

The flange on the 209 is right close to the rim of the .25ACP (which is semi-rimmed).

They fire off almost always. Every now and then, they need a couple hits. The round ball steps out of that short barrel with surprising alacrity. I fired some in the basement which penetrated 30-odd pages into a phone book.

It's silly but great fun.

I'll have to start looking for a 25acp. Thanks

by Edward Young @, Lexington, NC, Saturday, January 05, 2013, 10:31 (4286 days ago) @ Hoot

.

Thanks, Hoot and others..

by Catoosa, Sunday, January 06, 2013, 20:19 (4285 days ago) @ Hoot

I will have to hunt up some #3 shot and try that. Got the stuff to load .25 ACP but have not done any.

that's the new polyymer framed version

by stonewalrus, Friday, January 04, 2013, 21:14 (4287 days ago) @ Hoot

Nm

Ahh...gotcha.

by Hoot @, Diversityville, Liberal-sota, Saturday, January 05, 2013, 08:47 (4286 days ago) @ stonewalrus

Thanks

RSS Feed of thread

powered by my little forum